User's Manual

9
If learning successful, the Touch-screen transmitter will display “OK” on the top-right side of the screen also a
confirm melody.
z Locate
a. Press button to select different transmitter which you want to Locate.
Then press the button to Locate
Activate this function can locate where the missing key is. If there is a successful returned signal receiving from
the lost transmitter, will display OK on the top-right side of the handset. If failed, will display LOST.
The transmitter which has been searched will keep beeping and LCD flashing for 60 seconds and also display
the name of the call transmitter on the screen.
b. Using 1-way transmitter to Locate Touch-Screen transmitter
Press one way transmitter button +* together can locate the remote which has been learned.
The TS transmitter which has been searched will keep beeping and LCD flashing for 60 seconds and also
display the name (by number or by name depends on the name registration preset) of the 1-way transmitter on
the screen.
z Find
Press button to select different transmitter which you want to Find.
Then press the button to Find
Activate this function can trigger the missing transmitter, to be beeping and transmit signal out for 60 seconds.
The finder TS transmitter also will beep and display the range depend on the finder TS how close to the missing
transmitter as below:
Distance signals:
Far: Each time beeps twice.
Middle: Each time beeps 3 times.
Near: Each time beeps 4 times.
You can see the distance message (Far/Middle/Near) showed on the display to know whether you are getting
closer to the searched transmitter or not.
The transmitter which has been searched will keep beeping and LCD flashing for 60 seconds and also display
the name of the call transmitter.
If the transmitter is out of the receive range or have no returned signals from the searched transmitter, system
will show “NO FIND” on the display.