User Manual

14
OPTION PROGRAMMING
To Engage Option Programming:
1. Turn Ignition On (must be off at least 5 seconds before turning on).
2. Within 8 seconds, press valet switch 5 times. Wait for the unit to flash the parking lights and/or horn honks 5
times to confirm entering Option Mode.
3. Push the Valet program button the number of times that corresponds to the option number desired (1-24X). You
must get a light flash and/or horn honk after each button press. If the system did not flash the lights and/or honk,
then it did not register your press. Each option must be changed within 20 seconds.
4. When you reach the desired option #, press the transmitter button or step on footbrake to select the option level.
The lights will flash and/or honk with each option level. You will get 1, 2, 3 or 4 chirps with each press.
a. If there is no option level 3 or 4, then it returns the Preset value with 1 chirp.
b. After 20 seconds or turning ignition off, the system will have a long beep and exit the Option Mode.
OPTION PROGRAMMING
Option Selection
Default
(1 chirp)
Level 2
(2 chirps)
Level 3
(3 chirps)
Level 4
(4 chirps)
1 Engine Monitoring
Tachless
(low level)
Tach
Tachless
(high level)
Timed Crank
(hybrid)
2
Auto-lock/unlock
OFF
ON Lock with brake
Ignition Lock
(no unlock)
3
Lock pulse timer
0.5 Seconds
3 seconds Double unlock
“Wake Up” pulse on
Unlock
4
Pink/white wire selection
IGN
ACC START
5
Data port protocol
Fortin
ADS iDatalink D2D
6
Gray wire selection
ACC
IGN START