User Manual

OPTION DESCRIPTIONS

4. PINK / WHITE WIRE SELECTION:

This option controls the Pink / White wire function.

1. Pink / White = Ignition – Default.

2. Pink / White = Accessory

3. Pink / White = Start

5. DATA PORT PROTOCOL: Default = FORTIN

This option controls the Data Port Protocol for ADS / FORTIN Series modules or D2D Series modules. The default

is set for ADS IDATALINK Series Protocol. This option has no effect on conventional wiring of Bypass modules.

Both Data Protocols are 2-Way communication.

6. GRAY WIRE SELECTION:

This option controls the Gray wire function.

1. Gray = Accessory – Default

2. Gray = Ignition

3. Gray = START

7. REMOTE START ENGINE RUN TIME: Set engine run time for 10, 20, 30 or 5 minutes as desired.

Default = 20 minutes

8. LOCK with REMOTE START:

This option controls whether the unit will automatically lock during and after a remote Start abort or time-out. There

are 4 choices for this option:

1. Lock after Remote Start Only – Default.

2. OFF

3. Lock with Remote Start and Lock / Arm after Remote Start Abort

4. Lock and Arm with Remote Start Abort only

9. UNLOCK BEFORE REMOTE START:

This option is used to disarm an OEM Alarm System before Remote Start. Default = OFF