User Manual

18
OPTION DESCRIPTIONS
10. BLUE/ORANGE WIRE SELECTION:
This option controls the Blue/orange wire function.
1. Blue/orange = Start – Default
2. Blue/orange = Ignition
3. Blue/orange = Accessory
11. ORANGE/WHITE WIRE SELECTION:
This option controls the Orange/white wire function.
1. Orange/white = Accessory – Default
2. Orange/white = Ignition.
3. Orange/white = Start
12. ORANGE WIRE SELECTION:
There are 3 choices for this option.
1. Orange = OEM Arm – Default
2. Orange = Pulse after Remote Start Abort: This is used to reset Retained Accessory Power or RAP shutdown.
3. Orange = Pulse after Remote Start. This feature is used to activate the defroster switch on vehicles that only
work after vehicle is started.
13. BROWN WIRE SELECTION: DOME LIGHT, GWR (status output)
This output that can be programmed 2 ways:
1. 30 Second Dome Light with Unlock = Default. The dome light turns off with ignition on or remote lock.
2. Ground Out When Running.
14. IDLE DOWN RUN TIME:
This feature allows the remote starter to take over operation of a parked vehicle when the ignition key is removed
and you exit the vehicle. The vehicle will remain running for the programmed time or until canceled. The choices are:
10, 20, 30 minutes or Infinity Run. Default = 20 minutes.