User Manual

OPTION DESCRIPTIONS

21. TURBO TIMER:

The optional Turbo Timer mode allows the Cool Start system to keep a Turbo or Turbo Diesel vehicle running for 1,

3 or 5 minutes [selectively] after you remove the key and exit the vehicle. This is handy for turbo cool-down without

the need for expensive turbo timers. The Default = OFF.

．

．．

．

TIMED SELF START MODE: Default = OFF

This option allows the system to Self Start every 2, 3 or 4 hours.

23. PINK WIRE SELECTION:

This is a programmable output that has 4 choices;

1. Pink = Brake Reset - Default: This is used for vehicles that have (-) brake pedal switch.

2. Pink = Start Activation Input. This triggers a remote engine start or stop. Connect the Pink wire to an alarm or

keyless entry system with a remote Aux channel to activate the Remote Start by sending a (-) momentary

pulse to the PINK input wire. Other examples would be a GPS Tracker or Smart Phone interface.

3. Pink = Glow Plug Input. Connect the Pink wire to indicator circuit that shows a (-) Signal while the WAIT TO

START LAMP is on. When this wire is used, the system will wait until light turns off before attempting a

remote start.

4. Pink = Handbrake Reset. When this option is selected, the handbrake must be set for remote start. Releasing

the handbrake will Abort Remote Start

24. HYBRID STARTER CRANK TIME:

This option control the Hybrid crank time:

24-1 Starter Crank Time = 4 Seconds – Default

Option 24-2: Same as option 18 setting (0.8, 1.0, 1.2, or 1.4)

25. OPTION RESET: (RESTORE TO DEFAULT)

This option restores all programmable options 1 thru 24 to factory default. The horn will chirp once, the parking light

flash once and all values will be reset to factory original settings.