User Manual

8
WIRING Low Current 14 Pin Plug
ORANGE / BLACK: (-) OEM DISARM OUTPUT
This wire provides a Ground pulse to disarm the vehicles' Factory anti-theft system prior to a Remote Start.
Connect this wire to the vehicles' anti-theft disarm wire. This wire is sometimes found coming off the Driver's door
key switch or at the Factory Anti-theft control module. This wire may not be needed when using a Bypass Module or
if Factory Security only requires a door unlock pulse.
ORANGE: (-) OEM Arm (Option 12)
This is a programmable output that has 3 choices;
1. OEM Arm = Default: Provides a ground pulse to arm the OEM alarm.
2. Pulse after Remote Start Abort: This is used to reset Retained Accessory Power or RAP shutdown. Connect
the Orange wire to the drivers door pin switch.
3. Pulse after Remote Start: This feature is used to activate the defroster switch on vehicles that only work after
vehicle is started.
RED /WHITE: TACHOMETER INPUT
When installing the system in Tach mode, this wire must be connected to a valid source of AC voltage. This wire
allows the unit to sense the engine running and control the starter motor.
WIRING Valet Switch
PROGRAM OVERRIDE SWITCH: 2 PIN PLUG (REQUIRED FOR PROGRAMMING & LEARNING REMOTES)
This is a multi-function switch used for programming options, transmitters and valet mode. Mount the Valet/Program
button in a suitable location.