Manual

ManualsBrandsRockwell Automation ManualsEquipment1326-CPC1T-L Special Application Cables

1 Publication 1326-IN030A-EN-P - May 2007

Installation Instructions

1326 Special Application Cables

Catalog Numbers 1326-CPB1T-L, 1326-CPC1T-L

About This Publication

This document contains installation information for cables that have flying

leads. The flying leads allow the customer to determine the type of cable

terminations.

This table lists available 1326 special application cables and the cables they

obsolete.

This cable replaces this cable.

1326-CPB1T-L-xxx

1326-CPB1-xxx, 1326-CPB1-L-xxx, 1326-CPB1T-xxx

1326-CPC1T-L-xxx

1326-CPC1-xxx, 1326-CPC1-L-xxx, 1326-CPC1T-xxx

ATTENTION

DC bus capacitors on a drive retain hazardous voltages after

input power has been removed. Before beginning work on the

output power cable from any drive system, measure the bus

voltage at the drive to verify it has reached a safe level or wait

the full time interval as indicated in the warning on the front of

the drive. Failure to observe this precaution could result in

severe bodily injury or loss of life.

IMPORTANT

Do not coil a power cable on itself. Heat may buildup in a

closely coiled power cable and degradation of the cable

insulation may result.

Summary of content (4 pages)

PAGE 1
Installation Instructions 1326 Special Application Cables Catalog Numbers 1326-CPB1T-L, 1326-CPC1T-L About This Publication This document contains installation information for cables that have flying leads. The flying leads allow the customer to determine the type of cable terminations. This table lists available 1326 special application cables and the cables they obsolete. This cable replaces this cable.
PAGE 2
1326 Special Application Cables Cable Wiring Connector wiring pinouts and diagrams are provided for these cables. 1326-CPB1T-L-xxx Wiring This table provides wiring information for the 1326-CPB1T-DEL-xxx cables. Wire Number Signal Wire Color Gauge mm2 (AWG) 1326-CPB1T-DE Connector Female Contact 1 Power Black 1.29 (16) 1 2 Power Black 1.29 (16) 2 3 Power Black 1.29 (16) 3 4 Power Black 1.29 (16) 4 5 Power Black 1.29 (16) 5 Shield 1.
PAGE 3
1326 Special Application Cables 3 1326-CPC1T-L-xxx Wiring This table provides wiring information for the 1326-CPC1T-EL-xxx cable. Wire Number Signal Wire Color Gauge mm2 (AWG) Connector Pin 1 Power Black 2.59 (10) 1 2 Power Black 2.59 (10) 2 3 Power Black 2.59 (10) 3 4 Brake Black 1.29 (16) 4 5 Thermostat Black 1.29 (16) 5 6 Brake Black 1.29 (16) 6 Shield 2.05 (12) 7 Overall shield 8 GND Green/Yellow 2.05 (12) 8 9 Thermostat Black 1.
PAGE 4
The table and diagram depict the minimum bend radius for cables. Bend radius is the tightest (minimum) curvature allowed without potential damage to the cable. Cable Bend Radius Bend Radius BR Motor Power Cable Catalog Number 1326-CPB1T-EL-xxx 1326-CPC1T-EL-xxx BR mm (in.) (1) 104.1 (4.1) 160.2 (6.3) (1) Bend radius (BR) is the specified minimum bend radius for cable assemblies. For standard cable, BR is a one-time flex application. BR may vary on user-fabricated cables.