Installation

Bulletin 592 E1 Plus Overload Relay Application and Installation
(Cat 592-EE _ _ ; 592S-EE _ _ )
PN-68713
DIR 10000094347 (Version 01)
Printed in U.S.A.
Bulletin 509 Size 0, 1, 2
NEMA Size 0, 1, 2, 3, 4
(3 Phase)
NEMA Size 0, 1, 2, 3
(Single Phase)
12 lb-in
.sM
3
4
1
2
16 lb-in
.sM
23 lb-in
.sM
35 lb-in
.sM
NEMA Size 0, 1 NEMA Size 2
L3L2L1
T3T2T1
MOTOR
96
95
9897
To prevent electrical shock, disconnect from power source before installing or servicing. Install in suitable enclosure. Keep free
from contaminants.
Avant le montage et la mise en service, couper l'alimentation secteur pour éviter toute décharge. Prévoir une mise en coffret ou
armoire appropriée. Protéger le produit contre les environnements agressifs.
Desconéctese de la corriente eléctrica, antes de la instalación o del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una
caja apropiada. Manténgalo libre de contaminantes.
WARNING
AVERTISSEMENT
WARNUNG
L1 L2
L3
T3T1
MOTOR
9695 9897
To Replace Existing Overload Relay
- Disconnect power wires and control wires from overload relay.
- Remove the two screws that secure the overload relay to the mounting plate.
- Loosen, but do not remove the screws that connect the overload relay terminals to the contactor terminals.
- Lift overload relay away from mounting plate and slide away from contactor to remove.