Instruction Manual

SDS-TC500

Trusted

Industrial Control System

Trusted

I/O SmartSlot Cables - TC-500

Issue 7 Aug 2006

This document provides summary information for the different types of Trusted

I/O Cables available for use in

SmartSlot applications.

The SmartSlot I/O Cable enables all I/O and power connections between the SmartSlot I/O modules and the

associated termination assemblies. Termination assemblies may be located internally within the cabinet, or externally

in remote termination bays. Cables for use in internal applications have the standard sheathing replaced with Vidaflex

for greater flexibility.

The illustration below shows a typical SmartSlot I/O Cable for internal use with a standard Field Termination Assembly

(FTA). Other versions are available, as standard, with different connectors for use with the Versatile Field termination

Assembly (VFTA) and also with flying leads to facilitate connection to other conditioned termination devices.

In order to ensure that all Safety System applications are covered, Trusted

I/O Cables are available, as standard, in

either PVC or Low Smoke Low Halogen (LSLH). A code within the cable part number enables the user to specify the

type of cable required, e.g. 01 denotes PVC and 02 denotes LSLH.

Due to the flexibility of Trusted

I/O Cable design, it is possible to order cables of any length to within 0.1m. The

required length of the cable is specified by appending a code at the end of the part number, e.g. 2m5 for a required

length of 2.5m. The maximum recommended length is 15m.

As an example, the part number for a LSLH SmartSlot I/O Cable used for connecting analogue or digital input modules

to an internal FTA and 2.5m in length would be - TC-501-02-2m5

The list of cables currently available may be found overleaf. For details of the selection of cables for particular

applications, refer to Product Description PD-TC500.

PAGE 1
SDS-TC500 TrustedTM Industrial Control System TrustedTM I/O SmartSlot Cables - TC-500 TM This document provides summary information for the different types of Trusted SmartSlot applications. I/O Cables available for use in The SmartSlot I/O Cable enables all I/O and power connections between the SmartSlot I/O modules and the associated termination assemblies. Termination assemblies may be located internally within the cabinet, or externally in remote termination bays.
PAGE 2
SDS-TC500 TrustedTM Industrial Control System TrustedTM I/O SmartSlot Cables - TC-500 TM The types of Trusted Cable Type I/O SmartSlot Cables currently available are listed below. Description TC-501-01-xmx Input Cable, I/O SmartSlot, Analogue/Digital Input Module, Internal FTA, PVC, length x.xm. TC-501-02-xmx Input Cable, I/O SmartSlot, Analogue/Digital Input Module, Internal FTA, LSLH, length x.xm.