Operation Manual

6. TECHNICAL SPECIfICATIONS R680N

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 4 Ohms (THD<1%) 6 x 80W

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 2 Ohms (THD<1%) 6 x 140W

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 4 Ohms (THD<1%) 4 x 80W + 1 x 250W CH5/6 bridged into 4 Ohms

Damping Factor @ 4 Ohms Load

All Channels > 200

Signal-to-Noise Ratio (A-Filter Weighted)

All Channels @ full rated power output > 85dB

Frequency Response (-3dB)

Operation Mode set to FULL,

All Channels driven simultaneously 10Hz - 40kHz

Channel Separation

All Channels > 50 dB

Input Sensitivity

All channel Pairs 0.2V - 9V

Integrated Cross-Over/Filtering

Slope Rates 12 dB/Octave High-&Lowpass

Highpass Cross-Over Frequency Range continuously variable 10 - 400 Hz

Lowpass Cross-Over Frequency Range continuously variable 40 - 400 Hz

Fuses 4 x 30 A

Dimensions (W x H x D) 535 x 56 x 229 mm

Ro 6-CH Manual_D+E.indd 26 27.02.2006 18:15:46 Uhr