Operating instructions

CALCulate:MARKer Subsystem R&S ESCI
1166.6004.12 6.74 E-1
CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:SUMMary:MODE ABSolute | RELative
This command selects absolute or relative time domain power measurement in the indicated
measurement window. The function is independent of the marker selection, i.e. the numeric suffix <1
to 4> of :MARKer is irrelevant. It is only available in the time domain (span = 0).
The reference power for relative measurement is defined with CALCulate:MARKer:FUNCtion
:SUMMary:REFerence:AUTO ONCE. If the reference power is not defined, the value 0 dBm is
used.
Example: "CALC:MARK:FUNC:SUMM:MODE REL"
'Switches the time domain power
'measurement to relative.
Characteristics: *RST value: ABSolute
SCPI: device-specific
Mode: A-T
CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:SUMMary:REFerence:AUTO ONCE
With this command the currently measured average value (..:SUMMary:MEAN) and RMS value
(..:SUMMary:RMS)are declared as reference values for relative measurements in the indicated
measurement window. The function is independent of the marker selection, i.e. the numeric suffix <1
to 4> of :MARKer is irrelevant. It is only available in the time domain (span = 0).
If the measurement of RMS value and average is not activated, the reference value 0 dBm is used.
If the function ...:SUMMary:AVERage or ...:SUMMary:PHOLd is switched on, the current value
is the accumulated measurement value at the time considered.
Example: "CALC:MARK:FUNC:SUMM:REF:AUTO ONCE"
'Takes the currently measured power in
'screen A as reference value for the relative
'time domain power measurement.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A-T
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:SUMMary:AOFF
This command switches off all time domain measurements in the selected measurement
window.The function is independent of the marker selection, i.e. the numeric suffix <1 to 4> of
:MARKer is irrelevant. It is only available in the time domain (span = 0).
Example: "CALC2:MARK:FUNC:SUMM:AOFF" 'Switches off the time domain power
'measurement functions in screen B.
Characteristics: *RST value: _
SCPI: device-specific
Mode: A-T
This command is an event and therefore has no *RST value and no query.