Operating instructions
R&S ESCI MMEMory Subsystem
1166.6004.12 6.123 E-1
MMEMory:CLEar:ALL
This command deletes all device settings in the current directory.The current directory can be
selected with MMEM:CDIR. The default directory is D:.
Example: "MMEM:CLE:ALL"
Characteristics: *RST value: -
SCPI: device-specific
Mode: all
This command is an event and therefore has no *RST value and no query.
MMEMory:SELect[:ITEM]:HWSettings ON | OFF
This command includes the hardware settings in the list of data subsets of a device setting to be
stored/loaded. The hardware settings include:
• current configuration of general device parameters (general setup)
• current setting of the measurement hardware including markers
• activated limit lines:
A data set may include 8 limit lines at maximum in each measurement window. This number
includes the activated limit lines and, if available, the de-activated limit lines last used.
Therefore the combination of the non-activated restored limit lines depends on the sequence of
use with the command MMEM:LOAD.
• user-defined color setting
• configuration for the hardcopy output
• the activated transducers:
A data set may include 4 transducer factors at maximum. It comprises the activated factors and,
if available, the de-activated factors last used. Therefore the combination of non-activated
restored transducer factors depends on the sequence of use with the command MMEM:LOAD.
• Tracking generator settings
(only in conjunction with option Tracking Generator B9 or External Generator Control B10)
• Correction data for source calibration
(only in conjunction with option Tracking Generator B9 or External Generator Control B10)
Example: "MMEM:SEL:HWS ON"
Characteristics: *RST value: ON
SCPI: device-specific
Mode: all
MMEMory:SELect[:ITEM]:TRACe[:ACTive] ON | OFF
This command adds the active traces to the list of data subsets of a save/recall device setting. Active
traces are all traces whose state is not blank.
Example: "MMEM:SEL:TRAC ON"
Characteristics: *RST value: OFF, i.e. no traces will be stored
SCPI: device-specific
Mode: all