Instruction Manual

Comparison: RPP; RPP-A
2-jaw parallel grippers
___________________________________________________________________________
ID 1104573 Operating Manual RPP; RPP-A
Röhm GmbH, Dillingen Works Röhmstr. 6, 89407 Dillingen/Donau, GERMANY, Tel. [phone] Page 2 of 37
2-jaw parallel grippers, pneumatically actuated
RPP
Functional principle
• Tried-and-tested T-slots for gripping under maximum load
• Quick and efficient gripping
• Centrical gripping of round and angular workpieces
• Universal use by using different clamping jaws
• Optimum use in series production
• All sizes are available with two stroke lengths
• Clamping force regulation by means of pressure change
• Constant clamping force at the same pressure, and therefore high clamping precision
• Compact, ergonomic form
• Purge port to prevent contamination
• Grippers can be installed on two gripper sides
• Position polling possible by means of inductive and magnetic sensors
• Compressed air port via screw connection or direct port
• Gripping force lock for outer or inner gripping as extra type
• Base jaw / top jaw interface with centring sleeves