Instruction Manual

Maintenance, Repair of the Parallel Grippers
2-jaw parallel grippers
ID 1104573 Operating Manual RPP; RPP-A
Röhm GmbH, Dillingen Works Röhmstr. 6, 89407 Dillingen/Donau, GERMANY, Tel. [phone] Page 32 of 37
Maintenance and service life
The maintenance condition of the gripper is crucial for its function, clamping force, precision and service
life.
The gripper is lubricated at the factory with a basic lubrication of special grease, ID 1096752 Klueberplex
BEM 41-132.
We recommend Klueberplex BEM 41-132 for relubrication.
Service life with normal use without preventive maintenance: 5 million cycles
Service life with normal use with preventive maintenance: 10 million cycles
Recommendation for preventive maintenance:
For normal use:
Lubrication / cleaning: Every 2 million cycles or 1x per year
For heavy-duty use:
Lubrication / cleaning: Every 1 million cycles or every 6 months with grease nipple
If no grease nipple is fitted, a grease nipple should be fitted to the purge port and the gripper lubricated here.
We recommend Klueberplex BEM 41-132 for relubrication.