User Manual
Table Of Contents
- Introduction
- Contents
- USING THE UNIT SAFELY
- Do not disassemble or modify
- Do not repair or replace parts
- Do not use or store in the following types of locations
- Do not place in an unstable location
- Connect the AC adaptor to an outlet of the correct voltage
- Use only the included power cord
- Do not bend the power cord or place heavy objects on it
- Avoid extended use at high volume
- Do not insert foreign objects
- Turn off the power if an abnormality or malfunction occurs
- Do not allow children to use without supervision
- Do not drop or subject to strong impact
- Do not share an outlet with unreasonable number of other devices
- Before using the unit in a foreign country
- Place in a well ventilated location
- Grasp the plug when connecting or disconnecting the power cord
- Periodically wipe the dust off the AC adaptor plug
- Manage cables for safety
- Do not stand or place heavy objects on this unit
- Do not connect or disconnect the AC adaptor with wet hand
- Cautions when moving this unit
- Beware of burns
- Unplug the AC adaptor from the AC outlet before cleaning
- If there is a possibility of lightning strike, disconnect the AC adaptor from the AC outlet
- Cautions when opening/closing the lid
- Keep small items out of the reach of children
- IMPORTANT NOTES
- Names of Things and What They Do
- Before You Play
- Performing
- Performing with a Variety of Sounds
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Changing the Key of the Keyboard (Transpose)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Drum Set List
- Internal Song List
- Parameters Stored in Memory Backup
- MIDI Implementation Chart
- Main Specifications
- Index
40
Recording
Stopping Recording
7.
Press the [
] button.
Recording will stop. You can also press the [
] button to
stop recording.
Listening to the Recorded Performance
8.
If the indication “Usr.” is not displayed, press the
[Song] button repeatedly until it appears.
9.
Press the [–] button.
You will return to the beginning of the recorded
performance.
10.
Press the [
] button.
The recorded performance will play.
11.
Press the [
] button once again to stop
playback.
The recorded performance will disappear when you
turn off the power. If you want to keep the performance
you recorded, you must save it in the internal memory.
Refer to “Saving Songs” (p. 41).
If you have not saved the performance you recorded,
you won’t be able to play back another song. You’ll have
to erase (p. 40) or save (p. 41) the performance before
playing back another song.
You can erase recorded performances.
fig.RecordButtonz.eps_88
1.
Press the [Song] button a number of times until the
indication “USr.” is displayed.
fig.d-USrdotExp-e.eps_88
2.
Press the [+] button.
“dEL” will start blinking in the display.
fig.d-dEL.eps_88
If you decide not to delete the song, press the [
]
button.
3.
Press the [
] button.
The recorded performance is erased.
You can also erase the recorded performance by
holding down the [Song] button and pressing the [
]
button.
A performance you recorded will be deleted when you
turn off the power.
Erasing Recorded Performances
Lit if there is a recorded song
that has not been saved yet.
F-110_r_e.book 40 ページ 2009年6月30日 火曜日 午後12時6分