User Manual
Table Of Contents
- Introduction
- Contents
- USING THE UNIT SAFELY
- Do not disassemble or modify
- Do not repair or replace parts
- Do not use or store in the following types of locations
- Do not place in an unstable location
- Connect the AC adaptor to an outlet of the correct voltage
- Use only the included power cord
- Do not bend the power cord or place heavy objects on it
- Avoid extended use at high volume
- Do not insert foreign objects
- Turn off the power if an abnormality or malfunction occurs
- Do not allow children to use without supervision
- Do not drop or subject to strong impact
- Do not share an outlet with unreasonable number of other devices
- Before using the unit in a foreign country
- Place in a well ventilated location
- Grasp the plug when connecting or disconnecting the power cord
- Periodically wipe the dust off the AC adaptor plug
- Manage cables for safety
- Do not stand or place heavy objects on this unit
- Do not connect or disconnect the AC adaptor with wet hand
- Cautions when moving this unit
- Beware of burns
- Unplug the AC adaptor from the AC outlet before cleaning
- If there is a possibility of lightning strike, disconnect the AC adaptor from the AC outlet
- Cautions when opening/closing the lid
- Keep small items out of the reach of children
- IMPORTANT NOTES
- Names of Things and What They Do
- Before You Play
- Performing
- Performing with a Variety of Sounds
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Changing the Key of the Keyboard (Transpose)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Drum Set List
- Internal Song List
- Parameters Stored in Memory Backup
- MIDI Implementation Chart
- Main Specifications
- Index
51
Various Settings
When you press the damper pedal during Dual performance
or Split performance, the damper pedal effect is normally
applied to both tones, but you can also select the tone to
which the effect is to be applied.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [Strings] button and use the [–]
or [+] button to select “dPr.”
3.
Release the [Strings] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
When you turn on the power, the left pedal functions as the
soft pedal, and the center pedal functions as the sostenuto
pedal (p. 22).
You can change the function of the pedal to a variety of other
operations.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Hold down the [Strings] button and use the [–] [+]
buttons to select the pedal whose function you
want to change.
: Center Pedal
: Left Pedal
3.
Release the [Strings] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Pedal Settings
Changing How the Damper Pedal is
Applied (Damper Pedal Part)
Setting Explanation
All enabled
Applied only to Tone 1 (in dual mode)/Right-
hand Tone (in split mode)
Applied only to Tone 2 (in dual mode)/Left-
hand Tone (in split mode)
Changing How the Pedals Work
(Center/Left Pedal Function)
Setting
Explanation
Sostenuto
Sets function to sostenuto pedal.
(Selectable only for the center pedal)
Soft
Sets function to soft pedal.
(Selectable only for the left pedal)
Effects Switch
Effects can be switched on/off by pressing
the pedal.
When using the rotary effect, you can control
the speed of rotation.
* The most appropriate type of effect is
specified for each sound.
Play/Stop
The pedal will have the same function as the
[
] button.
Layer
Pressing the pedal will layer on Tone 2, used
for Dual performance.
* The Dual function can be applied only
when using Dual play.
Octave
Pressing the pedal will layer on a sound one
octave higher.
* The Octave function cannot be applied
while using Twin Piano, Dual play, or Split
play.
F-110_r_e.book 51 ページ 2009年6月30日 火曜日 午後12時6分