User Manual
Table Of Contents
- Introduction
- Contents
- USING THE UNIT SAFELY
- Do not disassemble or modify
- Do not repair or replace parts
- Do not use or store in the following types of locations
- Do not place in an unstable location
- Connect the AC adaptor to an outlet of the correct voltage
- Use only the included power cord
- Do not bend the power cord or place heavy objects on it
- Avoid extended use at high volume
- Do not insert foreign objects
- Turn off the power if an abnormality or malfunction occurs
- Do not allow children to use without supervision
- Do not drop or subject to strong impact
- Do not share an outlet with unreasonable number of other devices
- Before using the unit in a foreign country
- Place in a well ventilated location
- Grasp the plug when connecting or disconnecting the power cord
- Periodically wipe the dust off the AC adaptor plug
- Manage cables for safety
- Do not stand or place heavy objects on this unit
- Do not connect or disconnect the AC adaptor with wet hand
- Cautions when moving this unit
- Beware of burns
- Unplug the AC adaptor from the AC outlet before cleaning
- If there is a possibility of lightning strike, disconnect the AC adaptor from the AC outlet
- Cautions when opening/closing the lid
- Keep small items out of the reach of children
- IMPORTANT NOTES
- Names of Things and What They Do
- Before You Play
- Performing
- Performing with a Variety of Sounds
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Changing the Key of the Keyboard (Transpose)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Drum Set List
- Internal Song List
- Parameters Stored in Memory Backup
- MIDI Implementation Chart
- Main Specifications
- Index
59
Various Settings
Connecting the F-110 to a V-LINK compatible image device
allows you to control the images with the F-110.
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any
connections.
V-LINK
V-LINK (
) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily enjoy
performing a wide range of visual effects that are linked to
the expressive elements of a music performance.
How to Use the V-LINK
1.
Hold down the [Song] button and press the
[Metronome] button.
The display will indicate “_._._” if the V-LINK function is on, or
“. .” it is off. Repeat this step to select “_._._”, if necessary.
2.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
3.
Press and hold the [Others] button and use the [–]
or [+] button to select “vLn.”
4.
Release the [Others] button to see the current
setting.
5.
Use the [–] [+] buttons to set the desired MIDI
channel
.
6.
Press the [Reverb] or [Transpose] button to leave
Function mode.
The button’s indicator will return to its previous state.
If V-LINK is on, the bars at the bottom of the display will be lit.
fig.d-VLinkOn.eps_88
You can control images using the twelve keys at the left end
of the keyboard.
fig.V-LINK-Keyboard.eps_88
While V-LINK is switched on, no sound is produced
when you press any of the twelve keys at the left end of
the keyboard.
7.
To disengage V-LINK, hold down the [Song] button
and press the [Metronome] button to select “ . . .”
Normally, the settings of the various variations will revert to
their default values when the power is turned off. However,
you can specify that the various settings will be remembered
even when the power is turned off.
This function is called “Memory Backup.”
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
Other Settings
Using the V-LINK Function (V-LINK)
Settings (V-LINK Channel)
1–16
Remembering the Settings
(Memory Backup)
C1 D1 E1 F1 G1A0
A0 – G1#
B0
F-110_r_e.book 59 ページ 2009年6月30日 火曜日 午後12時6分