User Manual
Table Of Contents
- Introduction
- Contents
- USING THE UNIT SAFELY
- Do not disassemble or modify
- Do not repair or replace parts
- Do not use or store in the following types of locations
- Do not place in an unstable location
- Connect the AC adaptor to an outlet of the correct voltage
- Use only the included power cord
- Do not bend the power cord or place heavy objects on it
- Avoid extended use at high volume
- Do not insert foreign objects
- Turn off the power if an abnormality or malfunction occurs
- Do not allow children to use without supervision
- Do not drop or subject to strong impact
- Do not share an outlet with unreasonable number of other devices
- Before using the unit in a foreign country
- Place in a well ventilated location
- Grasp the plug when connecting or disconnecting the power cord
- Periodically wipe the dust off the AC adaptor plug
- Manage cables for safety
- Do not stand or place heavy objects on this unit
- Do not connect or disconnect the AC adaptor with wet hand
- Cautions when moving this unit
- Beware of burns
- Unplug the AC adaptor from the AC outlet before cleaning
- If there is a possibility of lightning strike, disconnect the AC adaptor from the AC outlet
- Cautions when opening/closing the lid
- Keep small items out of the reach of children
- IMPORTANT NOTES
- Names of Things and What They Do
- Before You Play
- Performing
- Performing with a Variety of Sounds
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Changing the Key of the Keyboard (Transpose)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Drum Set List
- Internal Song List
- Parameters Stored in Memory Backup
- MIDI Implementation Chart
- Main Specifications
- Index
61
Various Settings
4.
To execute the Factory Reset, press the [
]
button.
Never turn off the power while “Fct” is blinking in the
display.
When the Factory Reset has been completed, the following
display will appear.
fig.d-End.eps_88
5.
Turn the [Volume] knob all the way toward the left
to minimize the volume.
6.
Switch the power off, then back on.
If you activate the Panel Lock function, all buttons will be
locked and non-functional. You can use this to prevent a
child from accidentally changing the settings by
inadvertently pressing buttons.
1.
Press the [Reverb] button and [Metronome] button
simultaneously.
Panel Lock will be activated. All buttons will be disabled.
The following screen appears when Panel Lock is in force.
fig.d-lock.eps_88
Pressing buttons during playback or recording of a song
stops the playback or recording.
Canceling the Panel Lock function
Once again, press the [Reverb] button and [Metronome]
button simultaneously.
Panel Lock will be cancelled when you turn off the
power.
Disabling the Buttons
(Panel Lock)
F-110_r_e.book 61 ページ 2009年6月30日 火曜日 午後12時6分