User Manual
Table Of Contents
- Introduction
- Contents
- USING THE UNIT SAFELY
- Do not disassemble or modify
- Do not repair or replace parts
- Do not use or store in the following types of locations
- Do not place in an unstable location
- Connect the AC adaptor to an outlet of the correct voltage
- Use only the included power cord
- Do not bend the power cord or place heavy objects on it
- Avoid extended use at high volume
- Do not insert foreign objects
- Turn off the power if an abnormality or malfunction occurs
- Do not allow children to use without supervision
- Do not drop or subject to strong impact
- Do not share an outlet with unreasonable number of other devices
- Before using the unit in a foreign country
- Place in a well ventilated location
- Grasp the plug when connecting or disconnecting the power cord
- Periodically wipe the dust off the AC adaptor plug
- Manage cables for safety
- Do not stand or place heavy objects on this unit
- Do not connect or disconnect the AC adaptor with wet hand
- Cautions when moving this unit
- Beware of burns
- Unplug the AC adaptor from the AC outlet before cleaning
- If there is a possibility of lightning strike, disconnect the AC adaptor from the AC outlet
- Cautions when opening/closing the lid
- Keep small items out of the reach of children
- IMPORTANT NOTES
- Names of Things and What They Do
- Before You Play
- Performing
- Performing with a Variety of Sounds
- Adjusting the Keyboard Sensitivity (Key Touch)
- Adding Reverberation to Sounds (Reverb Effect)
- Changing the Key of the Keyboard (Transpose)
- Performing with Two Layered Tones (Dual Play)
- Performing with Different Tones in the Left and Right Sides of the Keyboard (Split Play)
- Performing with the Metronome
- Sounding a Count to Keep Your Timing Accurate
- Playing Back Songs
- Recording
- Saving Your Performance
- Various Settings
- Connecting to Other Devices
- Troubleshooting
- Error Messages
- Tone List
- Drum Set List
- Internal Song List
- Parameters Stored in Memory Backup
- MIDI Implementation Chart
- Main Specifications
- Index
63
Connecting to Other Devices
fig.F-110Audio2-e.eps_88
1.
Turn the volume all the way down on the F-110 and
on the audio player you’re about to connect.
2.
Turn off the power to the F-110 and connected
audio player.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the connected audio player.
5.
Switch on the F-110.
6.
Adjust the volume level on the F-110 and the
connected audio player.
The sounds from the connected audio player are played by
the F-110.
Adjust the volume by using the controls of your audio
player.
Turning Off the Power
1.
Turn the volume all the way down on the F-110 and
on the audio player you’re about to connect.
2.
Turn off the F-110.
3.
Turn off the connected audio player.
Playing Sounds of an Audio Player through the F-110
Input jacks
Digital audio player, etc.
Output (Line Out)
F-110_r_e.book 63 ページ 2009年6月30日 火曜日 午後12時6分