User Manual

10
Names of Things and What They Do
[MIDI THRU] Switch ON/OFF setting
You can use the [MIDI THRU] switch to specify the destination of MIDI messages sent
from the MIDI keyboard or digital piano connected to the MIDI IN cable.
fig.connect-change_e
* You can change the setting of the [MIDI THRU] switch while the UM-1G is connected to
the computer. There’s no need to re-connect the UM-1G when doing so.
* Don’t change the setting of the [MIDI THRU] switch while playback is in progress.
Doing so will cause MIDI errors.
Switch
Setting
MIDI Message Destination Device
OFF
MIDI messages flowing in through the UM-1G’s MIDI IN cable are routed to the
computer (sequencer software).
ON
MIDI messages flowing in through the UM-1G’s MIDI IN cable are output from the
UM-1G’s MIDI OUT cable. If you are not using sequencer software with your
performances, set this to ON.
MIDI Message Flow (THRU OFF)
MIDI Message Flow (THRU ON)
UM-1G_e.book 10 ページ ２００８年１１月１１日 火曜日 午後６時３０分