User Manual

15
Getting Connected and Installing Drivers
6. To begin the installation, click [Next].
If the Software Installation dialog box appears, click [Continue Anyway] to proceed with
the installation.
* If you are unable to proceed, click [OK] to halt the installation, and then change the settings as
described in “Driver Signing Options Settings (Windows XP)” (p. 27).
The screen will indicate “Ready to install the driver.”
* If any other message appears, proceed as directed by the message.
7. Set the UM-1G’s [ADVANCED DRIVER] switch to the ON position.
* If the [ADVANCED DRIVER] switch is set to OFF, the installation won’t take place as described in
the following procedure.
8. Use a USB cable to connect the UM-1G to your computer.
Operation of the UM-1G
Operation of the UM-1G
Connect to the
computer’s
USB connector.
[ADVANCED DRIVER]
Switch ON
UM-1G_e.book 15 ページ ２００８年１１月１１日 火曜日 午後６時３０分