User Manual

18
Getting Connected and Installing Drivers
Steps to be performed on the UM-1G itself are marked by a symbol.
Do not connect the UM-1G to your computer until you are directed to do so.
*If the Authenticate dialog box or Enter password dialog box appears during the installation,
enter your password and click [OK].
* What you actually see on the screen may differ depending on your system.
1. Start up Macintosh without the UM-1G connected.
* Disconnect all USB cables other than those for a USB keyboard and/or USB mouse (if used).
2. Close all currently running software.
3. Insert the included “UM-1G CD-ROM” into your CD-ROM drive.
4. In the Driver folder of the CD-ROM, double-click the UM1GUSBDriver.pkg.
A message such as “This package contains a program that...” or “This installer package
needs to...” may appear. If so, click [Continue].
5. The screen will indicate “Welcome to the UM-1G Driver Installer.”
Click [Continue].
6. If the screen indicates “Select a destination,” click the drive in which the operating
system is installed to select it, and then click [Continue].
* Select your startup disk as the install-destination drive.
7. The screen will indicate “Easy Install” or “Standard Install.”
Click [Install] or [Upgrade].
8. The screen will indicate “Installing this software requires you to restart your
computer when the installation is done.”
Click [Continue Installation].
Macintosh Users
Installing the Driver
Operation of the UM-1G
UM-1G_e.book 18 ページ ２００８年１１月１１日 火曜日 午後６時３０分