User Manual

21
Getting Connected and Installing Drivers
9. Click [Test Setup].
10.Click the UM-1G’s downward arrow. If the MIDI OUT indicator of the corresponding
port on the UM-1G blinks, the settings have been made correctly.
11.Click [Test Setup] and complete the confirmation.
12.Close the Audio MIDI Setup dialog box.
9, 11
Click Test Setup
10
Click the icon
When using the UM-1G with your sequencer software
Before using the UM-1G with your sequencer software, please note the following points.
• Connect the UM-1G to your Macintosh before you start up your sequencer software.
• Do not disconnect the UM-1G from your Macintosh while your sequencer software is
running.
Quit your sequencer software before you disconnect the UM-1G from your Macintosh.
• Select UM-1G for the MIDI Driver setting (as well as for other relevant items) within the
software you’re using.
• The UM-1G will not operate in the Mac OS X Classic environment. Use the UM-1G when the
Classic environment is not running.
UM-1G_e.book 21 ページ ２００８年１１月１１日 火曜日 午後６時３０分