User Manual

22
Basic Use
This chapter describes different basic methods of connecting the UM-1G according to how
the UM-1G is to be used.
To transmit MIDI messages from a MIDI keyboard or digital piano to the sequencer software
or make a MIDI recording of a keyboard performance or other performance using sequencer
software on your computer, make the following connections and settings.
fig.connect-in_e
MIDI device setting
* Make the device settings within the sequencer software.
[MIDI THRU] switch setting
MIDI messages from the MIDI device (e.g, MIDI keyboard, digital piano) connected to the UM-
1G’s MIDI IN cable are transmitted to the computer.
* Don’t change the setting of the [MIDI THRU] switch while you’re using the UM-1G. Doing so will
cause MIDI errors.
Basic Connections and MIDI Flow
Transmitting MIDI Messages from a MIDI Keyboard or Digital Piano to the
Sequencer Software
MIDI IN UM-1G
[MIDI THRU] switch OFF
MIDI Keyboard
Digital Piano
MIDI messages
are transmitted
to the sequencer
software.
Connect to the MIDI OUT
connector of the MIDI
keyboard or digital piano.
: MIDI Message Flow
Message Flow
MIDI IN cable
Connect to the
computer’s
USB connector.
[MIDI THRU]
switch OFF
UM-1G_e.book 22 ページ ２００８年１１月１１日 火曜日 午後６時３０分