User Manual

27
Troubleshooting
In some cases, you may be unable to install the driver because of the “Driver Signing
Options” settings. Make settings as follows.
1.
Open the Control Panel, click Performance and Maintenance, and then click the
System icon.
*If you’ve selected Classic view, double-click System.
2. Click the Hardware tab, and then click [Driver Signing].
The Driver Signing Options dialog box will open.
3. In the Driver Signing Options dialog box, select Warn or Ignore, and then click [OK].
4. Click [OK] to close the System Properties dialog box.
5. Install the driver as described in “Windows XP Users” (p. 14).
* When you’ve completed the installation, return the Driver Signing setting to its original state.
Did you connect the UM-1G to a different USB connector than the one you used when
installing the driver?
If your computer or USB hub has two or more USB connectors, and you connect the UM-1G to
a different USB connector, you may be asked for the driver file even though the driver has
already been installed in your computer. (Such a response does not indicate a malfunction.)
Proceed as follows to install the driver.
1. Use a USB cable to connect the UM-1G to your computer.
2. In the lower-right corner of the screen, the message “Found New Hardware” will
appear. Please wait until the Found New Hardware Wizard appears.
* It may take some time for the Found New Hardware Wizard to appear.
1. If you are asked whether you want to connect to Windows Update, choose No and then
click [Next].
Driver Signing Options Settings (Windows XP)
“Found New Hardware Wizard” Appears Even though You Installed the Driver
(Windows XP)
UM-1G_e.book 27 ページ ２００８年１１月１１日 火曜日 午後６時３０分