User Manual

31
Troubleshooting
Are you running multiple software?
Close software that you’re not using.
Even if an software window is closed, it is still running if it appears in the taskbar. Be sure to
exit unneeded software displayed.
You may experience an improvement if you select the “Lighten the processing load on
the computer” check box in the Driver Settings dialog box (Windows).
Proceed as follows to change the setting.
* Changes to this setting will take effect when you disconnect and reconnect the UM-1G’s USB
cable.
* Leave this check box unselected (the default state) if you’re not experiencing problems.
1. Close all programs that are using the UM-1G.
2. Open the Control Panel, click Additional Options, and then click UM-1G.
* If you’re using the Classic view, double-click the UM-1G icon.
The UM-1G Driver Settings dialog box will appear.
3. In the settings dialog box, select the Lighten Load check box.
4. Click [OK].
Is the driver installed correctly?
After installation, have you made settings so that the UM-1G can be used?
You won’t be able to use the UM-1G unless you’ve made these settings. Make the settings as
described in below.
Windows Vista: “Input/output Device Settings for Your Application” (p. 13)
Windows XP: “Input/output Device Settings for Your Application” (p. 17)
Macintosh: “MIDI Device Settings” (p. 19)
Can’t Play Back or Record
UM-1G_e.book 31 ページ ２００８年１１月１１日 火曜日 午後６時３０分