User Manual

36
Appendices
Use this mode when using the standard MIDI driver provided with the operating system.
1. With the UM-1G left unconnected, start up your computer.
Disconnect all USB cables other than those for your keyboard and mouse, and restart your
Macintosh.
2. Exit all currently running software (applications).
3. Set the UM-1G’s [ADVANCED DRIVER] switch to OFF.
4. Connect the UM-1G to the computer.
The driver is automatically installed.
In the application you’re using, select the MIDI device that you want to use. (For details on
how to make these settings, refer to the owner’s manual for the application you’re using.)
Windows Vista users
* You can’t use the UM-1G with the Media Player that’s included with Windows Vista.
Windows XP users
* Settings for using the UM-1G with the Media Player that’s included with Windows XP are the
same as for Advanced mode. Refer to “Settings for Using the UM-1G with Windows Media
Player” (p. 17), and select “USB audio device.”
Macintosh (Mac OS X) users
You must make MIDI input/output settings for Mac OS X before you use the UM-1G with your
application. The method is the same as for Advanced mode. Make settings as described in
“MIDI Device Settings” (p. 19).
About Standard Driver Mode
Installation of the Standard Driver
Input/output Device Settings
MIDI OUT device UM-1G
MIDI IN device UM-1G
MIDI OUT device USB audio device
MIDI IN device USB audio device
UM-1G_e.book 36 ページ ２００８年１１月１１日 火曜日 午後６時３０分