User Manual

9
Names of Things and What They Do
fig.panel
[ADVANCED DRIVER] (mode select) Switch
This switches the operating mode between Advanced mode and Standard driver mode.
Normally, you should use Advanced mode (ON).
*FPT=Fast Processing Technology of MIDI Transmission
[MIDI THRU] Switch
Selects the destination to which the MIDI messages that flow in through the UM-1G’s MIDI IN
cable are to output (→ [MIDI THRU] switch ON/OFF setting p. 22–p. 24).
[MIDI CHECK] Button
This transmits a MIDI note message from the UM-1G’s MIDI connector.
You can use this to check whether your sound module or other MIDI device is correctly
receiving MIDI data (“Testing the MIDI OUT” (p. 23)).
* The [MIDI CHECK] button cannot be used if the [MIDI THRU] switch is ON.
ON
(Advanced
mode)
This mode utilizes the UM-1G’s special, advanced MIDI driver.
This advanced driver uses *FPT technology for rapid, high-performance
MIDI transmissions.
OFF
(Standard
driver mode)
This mode uses the standard MIDI driver included with the OS.
Use this if you do not have the special driver installed.
7 8
9
7
8
9
UM-1G_e.book 9 ページ ２００８年１１月１１日 火曜日 午後６時３０分