User Manual
Table Of Contents
- USING THE UNIT SAFELY
- Important Notes
- Contents
- Main Features
- Panel Descriptions
- Before You Start Playing
- Enjoying the Internal Songs
- Performance
- Performing with a Variety of Sounds
- Playing Two Sounds Together (Dual Play)
- Changing the Brightness of the Sound (Brilliance)
- Adding Liveliness to the Sound (Dynamics)
- Playing Sounds When the Keys Are Released (Key Off Resonance)
- Adding Reverberation to the Sound (Reverb)
- Adjusting the Keyboard Touch (Key Touch)
- Transposing the Key of the Keyboard (Transpose)
- Splitting the Keyboard Into Two Sections for Four-Hand Performances (Twin Piano)
- Using Metronome
- Recording Your Performance
- Changing Various Settings
- Tuning to Other Instruments’ Pitches (Master Tuning)
- Changing the Temperament
- Changing the Damper Pedal’s Resonance (Damper Resonance)
- Setting the Tuning Curve (Stretch Tuning)
- Disabling Everything Except Piano Play (Panel Lock)
- Using the V-LINK function
- Remembering the Settings Even when the Power is Turned Off (Memory Backup)
- Restoring the Original Default Settings (Factory Reset)
- Connecting External Devices
- Appendices
- Index
21
Performance
Adding Reverberation to the Sound (Reverb)
By applying the reverb effect you can produce a pleasant reverberation, making it
sound as though you were performing in a concert hall.
fig.panel2-5
1.
Press the [REVERB/KEY TOUCH] button.
The button’s indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [REVERB/KEY TOUCH] button, getting its
indicator to go dark.
■
Changing the Depth of the Reverb Effect
The amount (depth) of the reverb effect can be set to any of ten levels.
1.
Hold down the [REVERB/KEY TOUCH] button and press the “C ” or
“E ” key.
Pressing the “C ” key as you hold down the [REVERB/KEY TOUCH] button reduces
the amount of reverb effect applied. Holding down the [REVERB/KEY TOUCH] button
and pressing the “E ” key increases the reverb effect.
2.
To restore the reverb depth to its factory-set state, hold down the
[REVERB/KEY TOUCH] button and press the “C ” and “E ” keys
simultaneously.
You can use the Memory
Backup function to store this
setting in internal memory (p.
36).
You can change the Depth of
the Reverb Effect by pressing
any “C ” or “E ” key.
Press
While holding down
the [Reverb/Key Touch]
button...
This is set to “4” when the
HP201 is shipped from the
factory.
HP201_e.book 21 ページ 2007年7月2日 月曜日 午後3時15分