User Manual
Table Of Contents
- USING THE UNIT SAFELY
- Important Notes
- Contents
- Main Features
- Panel Descriptions
- Before You Start Playing
- Enjoying the Internal Songs
- Performance
- Performing with a Variety of Sounds
- Playing Two Sounds Together (Dual Play)
- Changing the Brightness of the Sound (Brilliance)
- Adding Liveliness to the Sound (Dynamics)
- Playing Sounds When the Keys Are Released (Key Off Resonance)
- Adding Reverberation to the Sound (Reverb)
- Adjusting the Keyboard Touch (Key Touch)
- Transposing the Key of the Keyboard (Transpose)
- Splitting the Keyboard Into Two Sections for Four-Hand Performances (Twin Piano)
- Using Metronome
- Recording Your Performance
- Changing Various Settings
- Tuning to Other Instruments’ Pitches (Master Tuning)
- Changing the Temperament
- Changing the Damper Pedal’s Resonance (Damper Resonance)
- Setting the Tuning Curve (Stretch Tuning)
- Disabling Everything Except Piano Play (Panel Lock)
- Using the V-LINK function
- Remembering the Settings Even when the Power is Turned Off (Memory Backup)
- Restoring the Original Default Settings (Factory Reset)
- Connecting External Devices
- Appendices
- Index
32
Changing Various Settings
Tuning to Other Instruments’
Pitches (Master Tuning)
In situations such as when playing ensemble with other
instruments, you can tune the HP201’s standard pitch to the
pitch of another instrument. The standard pitch generally refers
to the pitch of the note that’s played when you finger the
middle A key. This tuning of all the instruments to a standard
pitch is called “tuning.”
You can set the standard pitch anywhere in a range of 415.3
Hz to 466.2 Hz.
This is set to “440.0 Hz” when the HP201 is shipped from the
factory.
You can use the Memory Backup function to store this
setting in internal memory (p. 36).
■
Lowering/Raising the Standard
Pitch
1.
While holding down the [METRONOME] and
[REVERB/KEY TOUCH] buttons, press the “C 1”
note to lower the standard pitch, or the “E 1” note
to raise it.
Each time you press the “C 1” key, the pitch will fall by
0.1 Hz. If you continue holding the key, the pitch will
continue falling.
Each time you press the “E 1” key, the pitch will rise by
0.1 Hz. If you continue holding the key, the pitch will
continue rising.
■
Setting the Standard Pitch to
440.0 Hz
The standard pitch will be set to 440.0 Hz. This is the
most commonly used setting. The A4 (Middle A) key will
sound at 440.0 Hz.
1.
While holding down the [METRONOME] and
[REVERB/KEY TOUCH] buttons, press the “C1” key
on the keyboard.
■
Setting the Standard Pitch to
442.0 Hz
The standard pitch will be set to 442.0 Hz. This setting is
often used for concert pianos. The A4 (Middle A) key will
sound at 442.0 Hz.
1.
While holding down the [METRONOME] and
[REVERB/KEY TOUCH] buttons, press the “D1” key
on the keyboard.
Press
Lower
the pitch
Raise
the pitch
While holding down
two buttons...
C1
D1
You can confirm the pitch of A4 by holding down the
[METRONOME] and [REVERB/KEY TOUCH] buttons and
pressing either the A0, B 0, or B0 key.
A0 B0
HP201_e.book 32 ページ 2007年7月2日 月曜日 午後3時15分