User Manual
Table Of Contents
- USING THE UNIT SAFELY
- Important Notes
- Contents
- Main Features
- Panel Descriptions
- Before You Start Playing
- Enjoying the Internal Songs
- Performance
- Performing with a Variety of Sounds
- Playing Two Sounds Together (Dual Play)
- Changing the Brightness of the Sound (Brilliance)
- Adding Liveliness to the Sound (Dynamics)
- Playing Sounds When the Keys Are Released (Key Off Resonance)
- Adding Reverberation to the Sound (Reverb)
- Adjusting the Keyboard Touch (Key Touch)
- Transposing the Key of the Keyboard (Transpose)
- Splitting the Keyboard Into Two Sections for Four-Hand Performances (Twin Piano)
- Using Metronome
- Recording Your Performance
- Changing Various Settings
- Tuning to Other Instruments’ Pitches (Master Tuning)
- Changing the Temperament
- Changing the Damper Pedal’s Resonance (Damper Resonance)
- Setting the Tuning Curve (Stretch Tuning)
- Disabling Everything Except Piano Play (Panel Lock)
- Using the V-LINK function
- Remembering the Settings Even when the Power is Turned Off (Memory Backup)
- Restoring the Original Default Settings (Factory Reset)
- Connecting External Devices
- Appendices
- Index
36
Changing Various Settings
Remembering the Settings Even
when the Power is Turned Off
(Memory Backup)
Normally, the settings of the various variations will revert to
their default values when the power is turned off. However,
you can specify that the various settings will be remembered
even when the power is turned off.
This function is called “Memory Backup.”
Stored Settings
• Brilliance (p. 19)
• Dynamics (p. 19)
• Reverb On/Off, Depth of the Reverb (p. 21)
• Damper Resonance (p. 34)
• Key Off Resonance (p. 20)
• Key Touch (p. 22)
• Twin Piano Mode (p. 25)
• Master Tuning (p. 32)
• USB Driver (p. 40) *Stored when you make the setting
1.
While holding down the [SONG] button and
[METRONOME] button, hold down the A0 key for
approximately five seconds.
The indicators of all buttons will blink several times. When
memory backup has been completed, the HP201 will
return to its previous state.
Restoring the Original Default
Settings (Factory Reset)
The memory backup settings can be restored to the original
default condition. This operation is referred to as “Factory
Reset.”
1.
While holding down the [SONG] button and
[METRONOME] button, hold down the C8 key for
approximately five seconds.
2.
When the indicators of all buttons start blinking,
switch off the power, then turn it back on again.
A0
Hold down for five seconds
C8
Hold down for five seconds
HP201_e.book 36 ページ 2007年7月2日 月曜日 午後3時15分