Operation Manual

19
Installing the Driver
Proceed as follows to verify that the driver was installed correctly.
We will use SONAR LE as an example for Windows, and GarageBand as an example for Mac OS X.
Here’s an example using a plug-in synth included with SONAR LE. The procedure or
screens may differ if you’re using a different version.
1 Start up SONAR LE.
2 From the [EDIT] menu, click [Preferences...], and from the left menu
click [Devices] in the MIDI field.
The screen in which MIDI input/output devices are selected appears.
3 Choose the following MIDI devices in the [Inputs] and [Outputs]
fields.
If you’re unable to select A-PRO as an input/output device, it may be that a
problem has occurred.
Refer to “Problems with Settings” in the Troubleshooting section (p. 76).
4 Click [Apply], then [Close] to close the Preferences dialog box.
5 In the [File] menu, click [New].
The “New Project File” dialog box will appear.
6 In the “Template” area, choose [Normal]; then enter a project name
in the “Name” field and click [OK].
fig.sonarnew.eps
7 In the [Insert] menu, choose [Soft Synths] and then [Square I].
8 In the “Insert Soft Synth Options” dialog box, select the [Synth
Property Page] option in the [Open These Windows] area, and click
[OK].
fig.sonarinsertoption-e.eps_34
9 Play the A-PRO’s keyboard.
If the MIDI monitor in the taskbar responds and you hear the sound of the synth, the
A-PRO is correctly connected to your computer.
Verifying that Installation was Successful
Checking with a SONAR Soft Synths (Windows)
Inputs Outputs
A-PRO MIDI IN
A-PRO 1
A-PRO 2
A-PRO
A-PRO MIDI OUT
A-300_500_800C_e.book 19 ページ ２０１４年８月１９日 火曜日 午後３時２７分