Operation Manual

58
System Settings (EDIT Mode)
Other
H-ACTIVITY ON/OFF
Turn this on when using specific applications (such as Pro Tools LE). If this is On, the message “90 00 7F” will
be transmitted from “A-PRO 2” at intervals of approximately 500 ms.
OFF p. 69
L9 FUNCTION Specifies the function of the [HOLD] button. HOLD p. 69
OMNI
If OMNI is On, all controllers will always transmit on the current channel, regardless of the MIDI transmit
channel setting that is assigned to the controller.
OFF p. 42
FACTORY RESET Returns the A-PRO to the factory-set condition.
–
p. 70
AUTO OFF
When not connected to a computer, the unit will automatically be switched off four hours after you stop
playing or operating it.
ON p. 70
Category Item Contents Factory setting See page
A-300_500_800C_e.book 58 ページ ２０１４年８月１９日 火曜日 午後３時２７分