Operation Manual

70
System Settings (EDIT Mode)
Refer to “What is OMNI?” (p. 42).
This will return the A-PRO to its factory-set condition.
1 Simultaneously press the [ACT] button and the [ ] button.
2 Use the [VALUE] knob to select “FACTORY RESET,” and press the
[ENTER] button.
“SURE?” will appear, blinking, in the display.
fig.lcd-RESETSURE.eps
3 If you are sure that you want to
execute the factory reset operation,
press the [ENTER] button.
“FACTORY RESET” will appear, blinking, in the display while the factory reset
operation is being carried out.
Once the factory reset is complete, “COMPLETE!” will appear in the display. You’ll
then be returned to Play mode.
When not connected to a computer, the unit will automatically be switched off
four hours after you stop playing or operating it (if the factory settings have been
unmodified). If you don’t want the unit to turn off automatically, change the “AUTO
OFF” setting to “OFF” as described below.
1 Simultaneously press the [ACT] button and the [ ] button.
2 Use the [VALUE] knob to select “SYSTEM SETTING,” and press the
[ENTER] button.
3 Use the [VALUE] knob to select “AUTO OFF,” and press the [ENTER]
button.
4 Use the [VALUE] knob to select “ON” or “OFF.”
5 Press the [ENTER] button to return to Play mode.
OMNI
FACTORY RESET
Making the Power Automatically Turn Off After a Time
(AUTO OFF)
Value Explanation
OFF The power will not turn off automatically.
ON (default)
When not connected to a computer, the unit will automatically be
switched off four hours after you stop playing or operating it.
A-300_500_800C_e.book 70 ページ ２０１４年８月１９日 火曜日 午後３時２７分