Operation Manual

89
Using an A-PRO Series Unit to Control Logic Pro/Express or GarageBand
The A-PRO series is compatible with music production software from Apple, including
Logic Pro/Express and GarageBand.
After installing the relevant A-PRO control surface plug-in (either the one for Logic Pro/
Express or the one for GarageBand) in your Mac, you’ll conveniently and easily be able
to control Logic Pro/Express or GarageBand from your A-PRO series unit.
This document provides a simple explanation of how to install and use the plug-
ins.
For more detailed information, refer to Readme_E.pdf which can be found in the
A-PRO_CSP folder on the A-PRO CD-ROM.
• Operating system: Mac OS X 10.5 Leopard or later
• Software version: Logic Pro/Express 8 or later, GarageBand ’09 or later
You must install the A-PRO driver before you install the A-PRO Control Surface
Plug-in. For information on how to install the driver, refer to the owner’s manual
that was supplied with your A-PRO series keyboard.
1 Insert the A-PRO CD-ROM into your CD drive.
2 If Logic Pro/Express or GarageBand is running, quit such software
first.
3 Open the A-PRO_CSP folder, which can be found on the A-PRO CD-
ROM, and double-click “APROControlSurfacePlugin.pkg.”
4 Perform the installation by following the instructions that appear
onscreen.
First, switch on the A-PRO’s power, then start up Logic Pro/Express or GarageBand.
You do not need to set anything in Logic Pro/Express or GarageBand.
On the A-PRO series instrument, you can use the controllers shown below.
Operating Requirements
Installation
Usage
A-PRO Panel Descriptions
Display
[VALUE] knob
Controllers [B1]–[B4]
Controllers [R1]–[R8]
Controllers [S1]–[S9]
Controllers [L1]–[L9]
Controllers [A1]–[A8]
[ ] button, [ ] button
A-300_500_800C_e.book 89 ページ ２０１４年８月１９日 火曜日 午後３時２７分