Owner's Manual Audio Recorder AR-200

54
Appendices
Recorded Phrase Data
When a piece of Phrase data recorded by the AR-200, the set-
tings of data on the card will be as follows.
If you will be using the card on the AR-3000, refer to this list.
Phrase settings
Playback Volume:
100
Delay time:
OFF
Playback point:
start: 00h00m00s00f00f0sf
End: The real time of the phrase
Repeat playback:
OFF
Loop playback:
OFF
fade:
fade in: OFF
fade out: OFF
Control output:
OFF
MIDI playback time:
120
Phrase name:
MESSAGE1
(MESSAGE + Phrase number)
Settings When a Card Is
Formatted
When a card is formatted by the AR-200, the settings of the
card will be as follows.
If you will be using the card on the AR-3000, refer to this list.
Recording settings
Recording jack select: LINE-IN
RDAC-GRADE: STANDARD
Recording type: Stereo
Trigger recording: OFF
MIDI Time base: 192 (MIDI phrase only)
Phrase messages
Playback Volume:
100
Delay time:
00s00f
Playback point:
start: 00h00m00s00f0sf
End: The real time of the phrase
Repeat playback:
OFF
Loop playback:
OFF
fade:
fade in: OFF
fade out: OFF
Control output:
OFF
MIDI playback tempo:
120
Phrase name:
MESSAGE1
(MESSAGE + Phrase number)
Card Edit
Card protect:
OFF
card name:
MESSAGE
Control input settings
control input MODE:
DIRECT
Direct playback method:
Normal
phrase assign
Port No. Phrase
1 A0001
2 A0002
3 A0003
4 A0004
5 A0005
6 A0006
7 A0007
8 A0008
9 A0009
10 A0010
11 A0011
12 A0012
13 A0013
14 A0014
15 A0015
16 A0016
Program Playback
Program 1 played back in order
No. 1: Phrase A0001
No.100: Phrase A0100
Programs 2 through 5 played back in order
No. 1: Phrase ----
No.100: Phrase ----
Binary playback
Level: ON
Edge: OFF
Terminal Rec
Phrase specify:Binary1
AR-200_e.book 54 ページ 2003年7月14日 月曜日 午後1時11分