Owner's Manual Audio Recorder AR-200

55
Appendices
Appendices
MIDI settings
MIDI OUT: OUT
(MIDI OUT/THRU)
MIDI note map:
C-1: Phrase A0001
↓
G9: PhraseA0128
MIDI note out: OFF
MIDI channel: OFF
MIDI note trigger: Trigger
MIDI receive messages: OFF
• Note on Velocity:OFF
• Panpot: OFF
• Expression: OFF
DEVICE ID: 1
MTC
• Sync source: Internal
• Sync out: OFF
• MTC type: 30
• MTC Error level: 5
MMC Mode
RS-232C Setting s
Data transmission speed setting: 9600
AR-LINK Setting
AR-LINK Mode : OFF
System setting s
Dual MONO Mode: OFF(Stereo)
Line thru setting
• Line thru select: ON
• Line thru volume level: 0
• Fade out: 0.05
• Fade in: 0.05
EQ
• Switch: OFF
Volume thru: OFf
Busy out
• Delay time: ON
• Phrase playback: ON
• Repeat playback: OFF
• Display Extinguished: OFF
ETC. settings
Recording phrase: 250
AR-3000 settings that can be
used
The following AR-3000 settings can be used by the AR-200.
Refer to this list if you will be using a card created by the AR-
3000.
Settings Data With the Card With the AR-200
Setting Setting
Recording Settings x o
Phrase settings(*1) o o (*2)
Direct playback setting o o (*4)
Program Playback Settings o x
Binary Playback Settings o (*3) o (*3)
Terminal Rec Settings o o (*5)
Dual Mono Mode Settings o x
MIDI notes setting o x
MIDI receive channel setting o o
MIDI note trigger o x
MIDI Device ID setting o x
Recording phrase o o
(*1) The phrase name will not be displayed on the AR-200.
(*2) Repeat playback setting of phrase settings will be
ignored at Interval Playback.
(*3) For binary playback, up to 250 phrases can be played
back.
(
*4 ) With Direct Playback, only Reverse Priority is
available.
(*5) Only Binary Recording (equivalent to Terminal Rec
Binary2) is possible.
AR-200_e.book 55 ページ ２００３年７月１４日 月曜日 午後１時１１分