Owner`s manual

AR-3000 RS-232C Reference -16

4.2.3 Setting Commands

Card Settings

= CV (Card Volume label)

Function: Card name setting

Syntax: stxCV: * ,“********”, ***** ;

a b c

a Card in slot

0 Card in slot A

1 Card in slot B

b Card name (up to 8 characters)

c Reserved (Only '0')

Example) stxCV:0,“ABCDEFGH”, 0;

This specifies a name of “ABCDEFGH” for the card in slot A.

Pattern Phrase Settings

< PU (Pattern phrase set Up for AR-2000)

Function: Pattern Phrase settings

Syntax: stxPU: **** , * , **** , **S* , .... , **** , **S* ;

a b c d .... c d

a Pattern Phrase number

b Pattern Phrase Playback mode

0 Sequence

1 Random

c Phrase number to be played back

d Delay Time (0S0 - 59S9)

Example) PU:A1,0,A5,5S0,A10,15S1,B151,10S0;

For phrase number “A0001”, this registers a “Sequential playback” pattern phrase

consisting of the following; phrase number “A0005”, a delay of “5 seconds”, phrase

number “A0010”, a delay of “15.1 seconds”, phrase number “B0151”, and a delay of

“10 seconds”.

Note: A maximum of 100 phrases can be specified in one line.

For the pattern phrase number, specify a phrase number where nothing is recorded.

For the playback phrase number, Audio phrases, MIDI phrases, and pattern phrases

can be specified.