User Manual

4
PD-8
Features
• Pad is compatible with dual triggers for separate
head and rim sounds.
• Velocity sensitive pad provides rich expression.
• Compact, 8.5-inch pad allows for greater versatility
when setting up.
• When used with a percussion sound module capable
of positional sensing, you can obtain tonal changes
by varying the location at which the pad is struck.
For details on positional sensing, refer to the documentation
for the percussion sound module you’re using.
Contents of the Package
Panel Description
Making the Settings
Attaching the Pad to a Stand
Attach the PD-8 to a drum stand.
When attaching the PD-8 to the pad mount, be sure to tighten
the stand fixing screw securely. If any of them remain loose,
the pad could fall off.
When attaching the PD-8 to a commercially available tom
stand, check the dimensions of the rod. Depending on the
dimensions of the rod, it may not be possible to attach the pad
to the stand.
Acceptable rod diameters: 8.5–11.5 (3/8 to 1/2 inch)
Connecting to a Percussion Sound
Module
921
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
1. Use the included connection cable and connect
the output jack of the PD-8 to the trigger input
jack of the percussion sound module.
Connect the L-shaped plug of the included cable to the
PD-8. This will prevent strain from being applied to the
PD-8.
❑ PD-8 (pad unit)
❑ Connection Cable (stereo)
■ Owner's Manual (this manual)
Stand Fixing Screw
Stand Fixing Screw
Head
Output Jack
Tighten
Loosen
Rod
Pass the rod through the pipe that is inside the holder.
PD/CY/KD/FD-8_e 4 ページ ２００７年７月２０日 金曜日 午前９時４５分