Owner`s manual

USB Driver Installation

A USB driver is software installed on your computer that handles data sent between your

computer’s software and the DUO-CAPTURE EX.

In order to use the DUO-CAPTURE EX with a computer, the USB driver must be installed.

NOTE

Do not connect the DUO-CAPTURE EX to the computer until you are directed to do so.

MEMO

Refer to the Roland website for the latest USB drivers and information about compatibility with

the latest operating system versions.

http://www.roland.com/support/

Install the USB Driver (Windows)

1. Set the DUO-CAPTURE EX’s [COMPUTER/TAB] switch to “COMPUTER” (“44.1” or “48”).

2. Start up the computer without the DUO-CAPTURE EX connected.

Exit all applications that are running.

3. Insert the included “DUO-CAPTURE EX Driver CD-ROM” into the CD-ROM drive.

4. Double-click the [Setup] icon in the [WinDriver] folder on the CD-ROM.

The installer starts.

5. Follow the instructions on the screen and install the software.

5-1.

When a conrmation screen regarding user account control appears, click the [Yes] button

or [Continue] button.

5-2. When “The DUO-CAPTURE EX Driver will be installed on your computer.” appears, click the

[Next] button.

5-3. Click the [Next] button again.

MEMO

• If a dialog box regarding Windows security appears, click the [Install] button.

• If the “Software Install” dialog box appears, click the [Continue] button.