Owner`s manual

USB Driver Installation
14
Install the USB Driver (Mac OS X)
1. Set the DUO-CAPTURE EX’s [COMPUTER/TAB] switch to “COMPUTER” (“44.1” or “48”).
2. Start up the computer without the DUO-CAPTURE EX connected.
Exit all applications that are running.
3. Insert the included “DUO-CAPTURE EX Driver CD-ROM” into the CD-ROM drive.
4. Double-click the [DuoCaptureEX_USBDriver] icon in the [MacDriver] folder on the
CD-ROM.
The installer starts.
If a dialog box requesting a password appears during installation, enter a computer
administrator’s user name and password and click the [Install Software] button or [OK] button.
5. Follow the instructions on the screen and install the software.
5-1.
When “Welcome to the DUO-CAPTURE EX Driver installer” appears, click the [Continue]
button.
5-2. If the screen for selecting the installation destination appears, select the startup disk and
click the [Continue] button.
5-3. When the installation type appears, click the [Install] button or [Upgrade] button.
5-4. Click the [Continue Installation] button in the next screen.
5-5. When installation has nished, click the [Restart] button.
6. After the computer starts up, connect the DUO-CAPTURE EX to the computer using
the USB cable and set the [POWER] switch to the “on” position.
MEMO
Refer to “Mac OS X MIDI Settings” (p. 26) if you intend to use MIDI.