User manual

20
Creating a New Style
This function specifies the time signature of the Style.
1. In the “Style Edit Menu,” select “12. Time Signature” and
press [ENTER].
The STYLE EDIT TIME SIGNATURE screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter you want to change, and use the VALUE dial to
make the desired setting.
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
MICROSCOPE lets you edit individual items of the
performance data recorded in the Style, such as notes or
velocities.
You can individually edit the following items.
• An event’s position • Controller number
• Note number • Controller value
• Note gate time • Program change number
• Note-on velocity • Pitch bend value
1. Select a Style (p. 26 in Owner’s Manual).
2. Press [MENU] so the button is lit.
3. Use [ ] [ ] to select “Style Composer,” and press
[ENTER].
The STYLE COMPOSER screen will appear.
4. Use [ ] [ ] [ ] [ ] to select the division that you
want to edit, and press [ENTER].
The STYLE COMPOSER ZOOM screen will appear.
5. Use [ ] [ ] [ ] [ ] to move the cursor to
“MICRO,” and press [ENTER].
The STYLE MICROSCOPE screen will appear.
Specifying the Time Signature
(Time Signature)
Parameter
Value Explanation
DIVISION
INTRO,
MAIN,
FILL,
ENDING,
ALL
Selects the division.
VARIATION
SW (1–4)
OFF, ON
Selects the division number.
You may select more than
one.
If DIVISION is set to ALL,
this will be ON for all
switches 1–4.
* You can’t execute the
function if nothing is
selected here.
Time Signature
1–32/2,
4, 8, 16
Specifies the time signature.
Editing a Style in More Detail
(STYLE MICROSCOPE)
1
1 3
2
54
GW-8_Ver2.book 20 ページ ２００９年６月８日 月曜日 午前１１時５５分