&& Look What You Can Do! && Play the Piano ee Play various sounds page 16 The unit contains a wide variety of tones (sounds). You can freely select and perform using these tones. ee Play two layered tones page 17 You can layer two tones on a single key. ee Play different tones with your left and right hands page 18 You can divide the keyboard into left and right zones, and select a different tone for each zone.
Adjust Your Piano ee Adjust the keyboard touch Operation Guide && page 21 You can adjust the touch sensitivity of the keyboard to match your own playing style. ee Add reverberation to the sound Panel Descriptions page 20 You can add reverberation (ambience) to create the sensation of performing in a concert hall. ee Adjust the brightness of the sound page 20 You can adjust the tone quality of the sound, ranging from a brilliant timbre to a mellow tone.
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 62), and “IMPORTANT NOTES” (p. 64). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2013 ROLAND CORPORATION All rights reserved.
&& Contents Other Settings (Option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Before You Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Setting Up the Music Rest. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Opening/Closing the Lid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
&& Operation Guide Adding Reverberation (Ambience) Adjusting the Keyboard Touch (Key Touch) You can add a pleasant reverberation to the sounds, producing the impression that you are performing in page 20 a concert hall. You can adjust the way in which the keyboard responds to your playing. page 21 To turn key touch on To turn ambience on Press the [Key Touch] button so it’s lit. Press the [Ambience] button so it’s lit.
Operation Guide Operation Guide Tone Buttons To select a single tone page 16 Press one of the tone buttons, and then use the [–] [+] buttons. page 17 To layer two tones (dual play) Press two tone buttons. Panel Descriptions Press two Press one To change the tones Press the [–] [+] buttons. Tone 2 Hold down the right-most of the lit tone button, and then use the [–] [+] buttons.
Operation Guide Adjusting the Song Volume (Song Balance) By modifying the playback volume of the song, you can adjust the balance between the song and your keyboard performance. Repeatedly Practicing a Portion of a Song (AB Repeat) page 27 To turn song balance on Press the [Song Balance] button so it’s lit. To adjust the song balance While holding down the [Song Balance] button, press the [–] [+] buttons. Display Here’s how you can make a specific portion of a song play back repeatedly. 1. 2. 3.
Operation Guide Operation Guide Selecting the Parts that will Play Here’s how to select the parts that will play. page 28 Press the [Right] button so it’s lit. To select the left-hand part Press the [Left] button so it’s lit. To select the other parts Press the [Accomp] button so it’s lit. Panel Descriptions To select the right-hand part To adjust the mute volume of a part Hold down the button of the part whose volume you want to adjust, and use the [–] [+] buttons.
&& Panel Descriptions USB Memory Port [Power] Switch This turns the power on/off. page 14 * The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was last used for playing music, or its buttons or controls were operated (Auto Off function). If you do not want the power to be turned off automatically, disengage the Auto Off function (p. 41). * Any settings that you are in the process of editing will be lost when the power is turned off.
Panel Descriptions DC In Jack * Before making this connection, you must make sure that the [Power] switch is off. Pedal Connector Connect the page 66 pedal cord of the dedicated stand to this connector. Panel Descriptions Connect the page 66 included AC adaptor here. Operation Guide Rear Panel and Bottom Panel (HP506) Rear side Before You Play Performing Output Jacks If you connect these jacks to amplified speakers, the sound of HP506 will be heard through them.
Panel Descriptions Rear Panel and Bottom Panel (HP504) Input jack DC In Jack If a digital audio player or other audio playback device is connected here, you’ll be able to listen to its playback through the HP504. Use the controls of your audio playback device to adjust the volume. Connect the page 66 included AC adaptor here. * Before making this connection, you must make sure that the [Power] switch is off. Pedal Connector Connect page 66 the pedal cord of the dedicated stand to this connector.
&& Before You Play Setting Up the Music Rest 1. You can use the holders to hold pages in place. When not using the holders, leave them folded down. Raising the music rest Push Gently raise the music rest. Before You Play 1. 2. Panel Descriptions 2. Using the music holders Fit the latch into one of the slots so that the music rest is at the desired angle.
Before You Play Turning the Power On/Off NOTE Once everything is properly connected (p. 11), be sure to follow the procedure below to turn on their power. If you turn on equipment in the wrong order, you risk causing malfunction or equipment failure. 1 2 On Off Softer Louder Turning the power on 1. Press the [Power] switch. After a brief interval, you’ll be able to produce sounds by playing the keyboard. * This unit is equipped with a protection circuit.
Before You Play Operation Guide Panel Descriptions Before You Play Performing Practicing Convenient Functions Function Mode Appendix If you don’t want the power to turn off automatically, change the “Auto Off” setting to “OFF”! The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was last used for playing music, or its buttons or controls were operated (Auto Off function).
&& Performing Performing with Various Sounds In addition to piano sounds, the unit lets you enjoy performing with many other sounds (350 types). These sounds are called “Tones.” The Tones are categorized into four groups, each of which is assigned to a different Tone button. Switching Tones Let’s start by performing with a piano tone. When you turn on the power, the “Concert” (Concert Piano) tone is selected. 1 1. 2 Press a tone button to select the tone group.
Performing Operation Guide Performing with Two Layered Tones (Dual Play) You can play two tones simultaneously from each note of the keyboard. This feature is called “Dual Play.” As an example, here’s how to layer piano and strings tones. Panel Descriptions 2 1 Before You Play 1. While holding down the Piano [Grand] button, press the [Strings] button. Both buttons will light. When you play the keyboard, you’ll hear both the piano and the strings tones. * Dual play is not available if Split Play (p.
Performing Playing Different Tones with the Right and Left Hands (Split Play) You can play different tones in the left and right sides of the keyboard, divided at a certain key. This feature is called “Split Play,” and the key at which the keyboard is divided is called the “Split Point.” 1 1. 2 While holding down the [Transpose] button, press the [Twin Piano] button. The display will indicate “SPLIT.” Name of the right-hand tone When Split is turned on, the keyboard settings will be as follows.
Performing Operation Guide Changing the left-hand tone Panel Descriptions 1 2 Before You Play 1. While holding down the [Transpose] button and [Twin Piano] button, press a tone button. The number and name of the tone currently selected for the left-hand zone are shown. While holding down the [Transpose] button and [Twin Piano] button, press the [–] [+] buttons. Performing 2. A different tone is selected.
Performing Adjusting the Sound to Your Taste The unit lets you add reverberation or modify the brightness of the sound. Adding Reverberation to the Sound (Ambience) You can add a pleasant reverberation to the sounds of the unit, producing the impression that you are performing in a concert hall. This effect is called “Ambience.” 1 3 2 1.
Performing While holding down the [Ambience] button, press the [Key Touch] button. The display will indicate the depth of the brilliance effect values. 2. Press the [–] [+] buttons. Value -10–0–10 (default: 0) Explanation Positive (+) values make the sound brighter; negative (-) values make the sound more mellow. Press [Ambience] button or [Key Touch] button to return to the previous screen. Before You Play 3.
Performing Dividing the Keyboard for Two-Person Performance (Twin Piano) You can divide the keyboard into left and right zones so that two people can play the same range of pitches, just as though there were two pianos. This function is called “Twin Piano.” For example, you could use Twin Piano to allow a student to play along with their teacher. Conventional keyboard 1 1. 3 Twin Piano divide point Press the [Twin Piano] button.
Performing Screen Value 1 (default) The sound of the right-hand keyboard zone will be heard more loudly from the right speaker than from the left speaker. The sound of the left-hand keyboard zone will be heard more loudly from the left speaker than from the right speaker. When using headphones, you’ll be able to hear the other person’s playing. Panel Descriptions 2 Explanation The sound of the right-hand keyboard zone will be heard only from the right speaker.
&& Practicing Practicing with the Metronome You can sound the metronome while you practice. While the song selects, the metronome will sound at the tempo and time signature of the song. 1. Press the [Metronome] button. The [Metronome] button will blink, and the metronome will sound. The [Metronome] button will blink red and green according to the currently selected time signature; red indicates the strong beats, and green indicates the weak beats. 2.
Practicing While holding down the [Metronome] button, press the [–] [+] buttons. Panel Descriptions 1. Operation Guide Adjusting the Metronome’s Volume The display will indicate the metronome’s volume. 1 Screen Explanation 0–10 When the volume of the metronome is set to “0,” the metronome won’t sound, but the [Metronome] button will blink.
Practicing Practicing with a Song You can practice by playing along with a song. Selecting and Playing a Song Here’s how to listen to the built-in songs. The unit provides over 200 built-in piano songs. You can also play back songs stored on a separately sold USB flash drive. 1. 2. Press the [Song] button. While holding down the [Song] button, use the [–] [+] buttons to select the category.
Practicing Operation Guide Song formats that can be played by the unit The unit can play back data in the following formats. • SMF formats 0/1 • Roland Piano Digital format (i-format) • Audio files: WAV format, 44.1 kHz, 16-bit linear Panel Descriptions Playing Songs Consecutively (All Songs Play) You can consecutively play back the built-in songs or the songs saved in the internal memory or on the USB flash drive repetitively. This function is called “All Songs Play.
Practicing Adjusting a Song’s Tempo for Easier Practicing You can change the tempo at which a song plays back. When you’re practicing along with a song, this allows you to slow down the tempo of a difficult song in order to play it more comfortably. 1. Press the [ ][ ] (Slow/Fast) buttons. The tempo will be indicated. MEMO If an audio file is selected, you can adjust the tempo in the range of 75–100–125%. 2.
Practicing Operation Guide Using the sound of a specific part as a “guide” (mute volume) If desired, you can specify that the sound of a part will play at a reduced volume rather than going completely silent when you press a part button and turn off its indicator. This setting lets you play a specific part at a reduced volume and use it as a “guide” for your playing. Panel Descriptions 1. While holding down the part button, press the [–] [+] buttons.
Practicing Repeatedly Practicing a Portion of a Song (AB Repeat) Here’s how you can repeatedly play back a specified portion of the song. You can use this function to repeatedly practice that portion. Section to repeat Time 1. Press the [ 2 B (Repeat End) A (Repeat Start) 3 4 1 ] (Play/Stop) button. The song will play back. 2. Press the [AB Repeat] button at the point where you want to start repeating (point A). The [AB Repeat] button will blink. 3.
Practicing Operation Guide Recording the Song You’re Practicing It’s easy to record your own performances. You can play back a recorded performance to check your playing, or perform along with a recorded performance. The unit lets you record in the following ways. Type of recording Explanation Panel Descriptions Parts will be separate. You can re-record a specific portion of the song. SMF recording You can overdub. * Normally, you should use SMF recording.
Practicing Saving a performance you’ve recorded * If you want to save to the USB flash drive (sold separately), connect your USB flash drive to the USB memory port before you continue. 1. Press the [ ] (Fast) button to select “Y.” Saving will begin. The recorded performance is saved at the earliest vacant song number. The song is automatically given a name in this format: “Song nnn,” where “nnn” is the song number. NOTE Never turn off the power while the screen indicates “Working...
Practicing 1. Operation Guide Recording the left hand Press the [Right] button and the [Accomp] button so their illumination is turned off. 2 3 1 * If you don’t specify a part at this time, the recorded performance will be recorded in this order: [Right] button [Left] button [Accomp] button. * If you’re using Twin Piano or Split Play, the left side or left-hand tone will be recorded to the [Left] button, and the right side or right-hand tone will be recorded to the [Right] button.
Practicing Recording a performance you play along with a song Here’s how you can record a performance that you play along with a song. Getting ready to record 1. Select the tone that you want record (p. 16). 2. Select the song to be dubbed (p. 26). 4 3. Press the [ The [ 3 5 ] (Rec) button. ] (Rec) button will light, and the unit will enter recording-standby mode. At this time, New Song will be selected. If you decide not to record, press the [ 4. ] (Rec) button once again.
Practicing By converting a song recorded in the form of an SMF to audio, you’ll be able to listen to it on your computer. You can also use your computer to burn the song to a music CD, or upload it to the Internet. Copying an audio recording of a song to your computer page 38 Panel Descriptions If you save an audio recording of a song on the USB flash drive, you’ll be able to listen to it on your computer.
Practicing Audio Recording Here’s how to record what you play on the unit as audio data. The recorded song can be used on your computer. HP506 only Thanks to its multiple number of speakers, each of which can be used to play a different portion of the overall sound, the unit is capable of producing piano sounds that possess great depth and seem to have three-dimensional presence. Such effects are produced when you play something on the keyboard, or when you play back a song that’s been recorded as an SMF.
Practicing Operation Guide Transposing a Song for Easier Performance (Audio Transpose) You can change the key when playing back an audio file. You can play the keyboard while listening to the transposed sound. HP506 only • Transposition will be applied to both to the selected audio file and to the sound from the digital audio player connected to the Input jack. Panel Descriptions • You can also use the Function mode’s “Audio Transpose” setting to change the amount of transposition (p. 51). 1.
Practicing Burning an Audio Recording of a Song (WAV file) to a CD After an audio recording of a song has been saved to the USB flash drive, you can copy it to your computer and burn it to a CD. If you want to burn a CD from a song that you recorded as an SMF, you must first convert it to audio (WAV file) (p. 35). In order to burn a CD on your computer, you’ll need software such as “iTunes.” For details, refer to the owner’s manual or the online help of your software.
Practicing Operation Guide Saving a Song with the Name You Specify Immediately after you’ve finished recording, you can save the song to the memory, song number, and song name that you specify. * If you want to save to the USB flash drive (sold separately), connect your USB flash drive to the USB memory port before you continue. 7 3 5 7 2 8 Make sure that you’ve finished recording, and that the screen shown at the right is displayed. Before You Play 1. 2.
Practicing Renaming a Song Here’s how rename a song you’re saved. 3 1. 2. 6 8 9 5 7 9 10 4 2 11 Select the song that you want to rename (p. 26). While holding down the [Song Balance] button, press the [AB Repeat] button. The [Song Balance] button and [AB Repeat] button will light, and the unit will enter Function mode. 3. 4. Use the [ ][ ] (Slow/Fast) buttons to select “SaveSong.” Press the [Song] button. The media select screen will appear.
&& Convenient Functions With the factory settings, the unit’s power will automatically be switched off 30 minutes after you stop playing or operating the unit. 1. 2. Use the [ ][ ] (Slow/Fast) buttons to select “Auto Off.” Use the [–] [+] buttons to change the setting. p. 20 Split Point p. 19 Twin Piano mode p. 22 Key Touch (on/off, value) p. 21 Damper Resonance p. 49 String Resonance p. 49 Key Off Resonance p. 49 DynHarmo p. 49 Cabinet Resonance p. 49 Soundboard Behavior p.
Convenient Functions 2. Restoring the Factory Settings (Factory Reset) Settings that you’ve stored using the Memory Backup function (p. 41) can be returned to their factory-set state. This is called the “factory reset” function. NOTE 3. Press the [ Song.” ][ ] (Slow/Fast) button to choose “Copy Press the [Song] button. A screen will appear, allowing you to select the copy-source and destination memory locations.
Convenient Functions Initializing the Memory (Format Media) Here’s how to delete a song that you saved on the internal memory or the USB flash drive (sold separately). Here’s how you can completely erase all songs that were saved in the internal memory or the USB flash drive (sold separately). MEMO NOTE • Once an initialization is performed, all songs that have been saved in the internal memory or the USB flash drive will be erased.
Convenient Functions Caution when initializing the memory Disabling the Buttons (Panel Lock) • Never turn off the power while “Working...” is shown in the display. When you activate Panel Lock, all buttons except for the [Volume] buttons will be disabled. • If the screen indicates “Error,” please refer to “Error Messages” (p. 57). This prevents the tones or settings from being changed if you inadvertently press a button.
Convenient Functions By inserting the wireless USB Adapter (WNA1100-RL; sold separately) into the unit’s USB MEMORY port, you’ll be able to use wireless-compatible applications (such as the “Piano Partner” iPad app). iPad etc. unit 3. 4. 5. While holding down the [Song Balance] button, press the [AB Repeat] button. Press the [ ] [ ] (Slow/Fast) buttons to select the “Wireless,” then press the [Song] button. Press the [ ] [ ] (Slow/Fast) buttons to select the “Connect,” then press the [Song] button.
Convenient Functions Wireless LAN Function Settings Connecting to a Wireless LAN Access Point That You Select (Select AP) You can view or edit the wireless settings. This method lets you connect by choosing a wireless LAN access point from the list that is displayed. Basic Operation 1. 2. 3. While holding down the [Song Balance] button, press the [AB Repeat] button. * Wireless standards 802.11g/n (2.4 GHz) and authentication methods WPA/WPA2 are supported. 1.
Convenient Functions Make settings for Wireless ID or Ad-Hoc mode. 1. 2. Press the [ ] (Fast) button to turn the Ad-Hoc Mode “On.” * To turn off Ad-Hoc Mode, press the [ Select “Wireless” g “Option.” Press the [ ] [ ] (Slow/Fast) buttons to select the parameter that you want to change. 3. Press the [–] [+] button to edit the value of the setting. ] (Slow) button. Once in Ad-Hoc Mode, the Ad-Hoc SSID (HP506 or HP504) will be displayed.
&& Various Settings (Function Mode) The same procedure is used for all settings in Function mode. 1. While holding down the [Song Balance] button, press the [AB Repeat] button. 3. 4. Press the [–] [+] buttons to edit the value of the setting. Press the [Song Balance] button or the [AB Repeat] button to exit Function mode. The [Song Balance] button and [AB Repeat] button will light; the unit will be in Function mode. 2.
Various Settings (Function Mode) Value Explanation Operation Guide Indication Specifying a Song’s Tonic (Temperament Key) When playing with tuning other than equal temperament, you need to specify the temperament key for tuning the song to be performed (that is, the note that corresponds to C for a major key or to A for a minor key). Tmpr Key If you choose an equal temperament, there’s no need to select a temperament key.
Various Settings (Function Mode) Indication Value Explanation Adjusting the Clarity of Individual Notes in a Chord (Soundboard Behavior) SoundBrd When you play a chord, this setting improves the clarity of the individual notes in the chord, creating a more beautiful resonance. Higher settings produce a clearer resonance. How to save your settings? Save your settings as described in “Memory Backup” (p. 41).
Various Settings (Function Mode) Value Explanation Operation Guide Indication Transposing an Audio File (Audio Transpose) You can shift the playback key of an audio file. You can also play along on the keyboard. AudTrans HP506 only * For some songs, an audio transpose setting other than 0 may affect the tone quality of the sound. * Transposition will be applied to both to the selected audio file and to the sound from the digital audio player connected to the Input jack.
Various Settings (Function Mode) Indication Value Explanation Preventing Doubled Notes When Connected to a Sequencer (Local Control) When you have a MIDI sequencer connected via USB, set this parameter to Local Off. LocalCtl Local Control Since most sequencers have their Thru function turned on, notes you play on the keyboard may be sounded in duplicate, or get dropped. To prevent this, you can enable the “Local Off” setting so that the keyboard and internal sound generator will be disconnected.
Various Settings (Function Mode) Value Explanation Operation Guide Indication Changing the USB Flash Drive Setting (USB Memory Mode) In some cases, when USB flash drive is connected to the USB memory port, it may take longer for data to be loaded, or data may fail to be loaded successfully. If this occurs, you may be able to solve the problem by changing the USB flash drive setting. USB Mode When the unit left the factory, this was set to “2” Normally, there is no need to make this setting.
Various Settings (Function Mode) Indication Wireless Value Explanation Wireless LAN Function Settings You can view or edit the wireless settings (p. 45). Specifying the Maximum Volume (Volume Limit) VolLimit You can specify the maximum [Volume] setting. This will prevent undesirably high volumes even if the volume buttons are operated unintentionally. How to save your settings? Save your settings as described in “Memory Backup” (p. 41).
&& Troubleshooting Cause/Action Even though you’re using headphones and the sound is muted, a thumping sound is heard when you play the keyboard The unit uses a hammer action keyboard in order to simulate an acoustic piano’s playing touch as realistically as possible. For this reason, you’ll hear the hammers thump when you play the keyboard, just as you would when playing an acoustic piano.
Troubleshooting Symptom Cause/Action The unit’s piano sound faithfully simulates the depth and resonance of an acoustic piano, and this may give the impression of Reverberation remains even if You reverberation even if you’ve defeated the Ambience effect. defeat the Ambience effect Also, you may be able to eliminate some reverberation by reducing the value set for “Cabinet Resonance.
Error Messages Action Operation Guide Problem For problems related to communication • Make sure that your wireless LAN access point supports WPS. If your wireless LAN access point does not support WPS, you can connect using the procedure described in “Connecting to a Wireless LAN Access Point That You Select (Select AP)” (p. 46). • The 802.11a/b wireless standard is not supported. Please use the 802.11g/n (2.4 GHz) wireless standard. • The WEP authentication method is not supported.
&& Tone List Piano–Grand No. 1 Tone Name Explanation Concert The sound of a splendid concert grand piano. This piano sound has our highest recommendation, and can be used for any style of music. 2 Ballade A mellow grand piano sound, recommended for quiet songs. 3 Bright A brilliant grand piano sound, recommended when you want the piano to stand out in an ensemble. 4 Magical A charming sound that layers synth bells with Concert. 5 Pno+Str Strings layered with Concert.
&& Internal Song List Song Title Composer MASTERPIECE a.001 a.002 a.003 The Nutcracker "Danse des Mirlitons" Peter Ilyich Tchaikovsky The Marriage of Figaro "Overture" Wolfgang Amadeus Mozart Barcarolle Fryderyk Franciszek Chopin No. Song Title Composer a.054 Humoreske Antonín Dvořák a.055 Blumenlied Gustav Lange a.056 Alpenglöckchen Theodor Oesten a.057 Menuett G dur Ludwig van Beethoven a.058 Venezianisches Gondellied Felix Mendelssohn a.
&& Main Specifications Roland HP506: Digital Piano Keyboard Internal Memory Keyboard 88 keys (PHA-4 Concert Keyboard: with Escapement and Ebony/ Ivory Feel) Save Song Standard MIDI Files (Format 0) Max.
Main Specifications Keyboard Internal Memory Save Song Standard MIDI Files (Format 0) Max.
&& USING THE UNIT SAFELY About WARNING and CAUTION Notices About the Symbols The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
USING THE UNIT SAFELY WARNING Be cautious to protect children from injury Always make sure that an adult is on hand to provide supervision and guidance when using the unit in places where children are present, or when a child will be using the unit. Do not drop or subject to strong impact Otherwise, you risk causing damage or malfunction. Do not share an outlet with an unreasonable number of other devices Otherwise, you risk overheating or fire.
&& IMPORTANT NOTES Power Supply Maintenance Repairs and Data • Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter or a motor (such as a refrigerator, washing machine, microwave oven, or air conditioner). Depending on the way in which the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise.
IMPORTANT NOTES Regarding the wireless LAN function • If you experience noise or dropouts while using the wireless LAN function, take the following measures. These may improve the situation. • Move wireless devices away from this unit.
&& Assembling Stand Assembly • To assure that assembly is carried out properly, make sure to read these instructions before you begin the assembly. Please keep these instructions close at hand, so you can refer to them whenever you need. • To move the piano, lift it carefully—all the while keeping it level. • Be careful not to pinch your hands or drop this unit on your foot during assembly or transport.
5. Hook the metal brackets of the rear board over the screws you loosened, as shown in the illustration . 6. Use four screws B 4. Fasten the headphone hook D using screws C (M4 x 16 mm) . (M5 x 20 mm) to provisionally fasten the Operation Guide pedal board . 7. Securely tighten the two side board screws and four pedal board screws .
&& Index A E O T a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 AB Repeat . . . . . . . . . . . . . . . . . . . . . . 8, 30 Accompaniment part . . . . . . . . . . . . . 28 All Songs Play. . . . . . . . . . . . . . . . . . . . . 27 Ambience . . . . . . . . . . . . . . . . . . . . . . 6, 20 [Ambience] button. . . . . . . . . . . . . . . . 20 Assembling. . . . . . . . . . . . . . . . . . . . . . .
Operation Guide For EU Countries Panel Descriptions Before You Play Performing Practicing For China Convenient Functions Function Mode Appendix 69
For the U.K. IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
AFRICA REUNION SOUTH AFRICA Paul Bothner(PTY)Ltd. Royal Cape Park, Unit 24 Londonderry Road, Ottery 7800 Cape Town, SOUTH AFRICA TEL: (021) 799 4900 ASIA Roland Shanghai Electronics Co.,Ltd. 5F. No.1500 Pingliang Road, Yangpu Shanghai 200090, CHINA TEL: (021) 5580-0800 GUATEMALA Theera Music Co. , Ltd.
* 5 1 0 0 0 3 4 9 2 3 - 0 1 *
