User Manual

REFERENCE

• For more about connections, refer to “Rear Panel Connections” (p. 22).

• For more about front center speaker (C jack) and subwoofer (LFE jack) output settings, refer to “Motional Surround Settings (MOTIONAL

SURROUND)” (p. 49) in System Settings.

* Dolby Digital and DTS are not supported. Please

use analog cables to connect ve speakers and a

subwoofer.

LFE

LsRs

LFE

R L

Ls Rs

Jack

name

Explanation

L Front left output

R Front right output

C Front center output

Ls Rear left output

Rs Rear right output

LFE Subwoofer output

It’s best to place the subwoofer at the same

distance as the satellite speakers, with the

listening position at the center.

If you want to use Motional

Surround with a two-channel

system, connect your

speakers to the A (MIX) L

(MONO)/R jacks.

05 Creating a Sound Field with Depth

Connection example

Here’s an example of using the INTEGRA-7’s Motional Surround function for 5.1 channel surround output.

Place your speakers as shown in the illustration.

To use the Motional Surround function, press the [MOTIONAL SURROUND] button to turn the Motional Surround function on.

About the monitoring environment

• An acoustically dead space with minimal reverberation is ideal as a monitoring room.

• You should monitor at the sweet spot of your speaker system.

Concerning perception of a sound image’s location

• The ease with which one can sense where a sound emanates from can dier depending on the sound.

For example, it is dicult to perceive the spatial location of low-frequency sounds or sounds that have relatively little harmonic content

(such as sine waves). Conversely, it tends to be easier to determine the location of sounds having rich harmonic content and a distinct

attack.

• Perception of front/back localization can dier between individuals.