User Manual

06 Using SONAR LE to Play Sounds (Windows)
Installing SONAR LE
Install the included SONAR LE in your computer.
For details on installation and main operations, refer to the manual included on the SONAR LE DVD-ROM.
* SONAR LE is for Windows only. If you are a Mac user, you’ll need to obtain DAW software separately.
Audio and MIDI settings
Important!
Before you begin making settings, download the INTEGRA-7’s USB driver from the Roland website and install it (p. 43). When
installing the driver, change the USB Driver setting to “VENDER” (p. 44).
Audio settings
Specify the INTEGRA-7 as the audio input and output.
1. Use a USB cable to connect the INTEGRA-7 to your computer.
Connect the INTEGRA-7 to your computer as shown in “Connection example 1: A compact production setup” (p. 10).
2. Start up SONAR.
3. The “Quick Start” dialog box will appear. Click [Close].
4. Click [Edit] [Preferences] to access the “Preferences” dialog box.
5. From the “Audio” list at the left of the screen, choose [Options]. Choose “ASIO” as the driver mode, and click [Apply].
6. In the “Audio” section of the list at the left of the screen, choose [Select Device]. Clear the check marks from audio devices
you’re not using, and enter a check mark only for the INTEGRA-7.
Input device Output device
INTEGRA-7 IN INTEGRA-7 OUT
* When selecting INTEGRA-7 OUT as the output device, you need to set the “Ext Part Source Select” parameter under “Volume and Pitch
Settings (SOUND)” (p. 48) to “USB AUDIO.”
MIDI settings
Next, you need to specify the INTEGRA-7 as the MIDI input and output device.
7. In the “MIDI” section of the list at the left of the screen, choose [Select Device]. Enter a check mark for the INTEGRA-7, and
clear the check marks from MIDI devices you’re not using.
Input device Output device
INTEGRA-7 INTEGRA-7
8. Click [Apply].
9. In the “Preferences” dialog box, click [Close].
MEMO
If the INTEGRA-7 is not shown in the list of devices, close SONAR and try the operation again from step 2.
If it is still not shown, the driver installation might not have completed successfully. Uninstall the driver, and then install the driver once again.
* When handling ordinary performance data, use “INTEGRA-7.”
Use “INTEGRA-7 CTRL” (Windows only) when handling control data, such as
that for MOTIONAL SURROUND.
18