User Manual
Introduction Playing/Creating Sounds Use with a Computer Overall Settings Appendix
Quick Guide
Recording on a MIDI track
Connect the INTEGRA-7 to your computer as shown in “Connection example 1: A compact production setup” (p. 10).
* Turn the INTEGRA-7’s USB-MIDI Thru setting (p. 49) ON.
1. In the [File] menu, click [New].
The “Create a New Project” dialog box will appear.
2. In the “Template” area, choose [Normal]; in the “Name” area, enter a name for
your project and then click [OK].
3. Record a MIDI track in SONAR.
For details on how to record, refer to SONAR’s help.
4. Play back SONAR.
You’ll hear sound from the INTEGRA-7.
Recording the INTEGRA-7’s sound on an audio track
1. In the [Insert] menu, choose [Audio Track].
One audio track will be added.
2. For the input eld of the audio track, choose “Stereo INTEGRA-7 IN.”
Track control list
Input eld
MEMO
If the input eld is not shown, click the track control list and choose “ALL.”
3. Adjust the recording level.
Put the track in recording-standby mode, then get the INTEGRA-7 to start playing. Adjust the input level of the SONAR so that the level meter
reaches approximately -6 during the loudest passages.
* For details on the recording procedure, refer to SONAR’s help.
4. Record.
Put the track in recording-standby mode, and press the record button of the transport module to begin recording.
Recording-
standby
Record
Level meter
5. When the song ends, press the stop button.
Recording will stop, and the recorded sound will be shown as a waveform in the audio track of SONAR.
19