User Manual

Basic Operation
This section explains the basic button operations used to operate the INTEGRA-7.
[TONE FINDER] button
Accesses the TONE FINDER screen.
[PART VIEW] button
Accesses the screen that lists all parts.
Press this button once again to access
the PART VIEW screen for the currently
selected part.
[SHIFT] + [PART VIEW] button
Accesses the Studio Set select
screen.
[EFFECTS] button
Accesses the EFFECTS ROUTING
screen.
[EDIT] button
Accesses the TONE EDIT screen
for the currently
selected part.
[SHIFT] + [EDIT] button
Accesses the WRITE screen.
[MENU] button
Accesses the menu screen.
Accesses settings for the INTEGRA-7
or various functions.
[SHIFT] + [MENU] button
Accesses the data loading screen
for the EXPANSION Virtual Slots.
Cursor buttons
Move the cursor.
Value dial
Edits a value.
page 31 page 30 page 15
page 38
page 29
page 36
page 41 page 28
page 28
TONE [SuperNATURAL] button
TONE [PCM] button
These switch the tone of the
currently selected part between
SuperNATURAL or PCM tones, and
display a tone list.
page 31
[MOTIONAL SURROUND] button
Accesses the MOTIONAL SURROUND
screen.
page 34
Switching Parts
Here’s how to switch the part that’s shown in the screen or is
selected (the “current part”).
In the top screen, the current part is indicated by a
symbol below
the part number.
PART [ ] [ ] buttons
Press the PART [ ] button to switch to the next part. Press the
PART [
] button to switch to the previous part.
If you hold down the PART [
] or PART [ ] button, the part will
change successively.
The part will switch more rapidly if you press the PART [
] (or
PART [ ] button) while holding down the PART [ ] button (or
PART [ ] button).
Moving the Cursor
A single screen or window will contain multiple items (parameters)
to edit or select. To edit a parameter’s setting, you must rst move
the cursor to that parameter’s value.
The value of the selected parameter is highlighted.
Cursor buttons
You can move the cursor by pressing the cursor [ ] [ ] [ ] [ ]
buttons.
If you hold down a cursor button, the cursor will continue moving.
If you hold down the cursor button for the desired direction, and
then press the opposite cursor button, the cursor will move more
quickly.
Editing a Value
To edit the value highlighted by the cursor, use either of the
following controllers.
• Value dial
• [DEC] [INC] button
Value dial
Turning the value dial toward the right will increase the value, and
turning it toward the left will decrease the value.
If you hold down the [SHIFT] button while turning the value dial,
the value will change in larger steps.
[DEC] [INC] buttons
Press the [INC] button to increase the value, or press the [DEC]
button to decrease the value.
• If you hold down a button, the value will increase (or decrease)
continuously.
• To rapidly increase the value, hold down the [INC] button and
press the [DEC] button. Conversely, to rapidly decrease the
value, hold down the [DEC] button and press the [INC] button.
• If you hold down the [SHIFT] button and press the [INC] button
or [DEC] button, the value will change in larger steps.
28