User Manual

Playing Sounds
Introduction Playing/Creating Sounds Use with a Computer Overall Settings Appendix
Quick Guide
Choosing a Tone
In the PART VIEW screen you can select the tone for each part.
You can view the tone list by category or by type.
Tone Preview function
By pressing the [VOLUME] knob you can audition the tone of the
selected part.
Selecting Tones from a Tone List by
Category
1. Press the [TONE FINDER] button.
The tone list organized by category will appear.
2. Use the cursor [ ] [ ] buttons to switch categories.
3. Use the value dial or the cursor [ ] [ ] buttons to select
a tone, and press the [ENTER] button.
MEMO
By holding down the [SHIFT] button and using the cursor
[
] [ ] buttons, you can switch to the next (or previous)
type/bank.
Selecting Tones from a Tone List by
Type/Bank
1. Press the [SuperNATURAL] or [PCM] button.
The tone list will appear.
2. Use the cursor buttons to switch the type or bank tab.
3. Use the value dial or the cursor [ ] [ ] buttons to select
a tone, and press the [ENTER] button.
Selecting Drum Kits from a Tone List
1. Press the [SuperNATURAL] or [PCM] button.
The tone list will appear.
2. Use the cursor buttons to select the drum kit tab.
Select the “SN Drum Kit” tab for SuperNATURAL tones, or the “PCM
Drum Kit” tab for PCM tones.
3. Use the value dial or the cursor [ ] [ ] buttons to select
a drum kit, and press the [ENTER] button.
31