User Manual

Editing a Studio Set
Saving a Studio Set
Edits you make to a Studio Set are temporary; they will be lost
when you turn o the unit or select another Studio Set. If you want
to keep an edited Studio Set, you must save it.
NOTE
When you execute the Write operation, the existing data at the
write destination will be overwritten.
1. From the top screen or the STUDIO SET EDIT screen, hold
down the [SHIFT] button and press the [EDIT] button.
The WRITE MENU screen will appear.
2. Choose “STUDIO SET WRITE” and press the [ENTER]
button.
3. Assign a name for the Studio Set.
For details on how to assign a name, refer to “Assigning a Name” (p.
29).
4. Press the [ENTER] button.
5. Use the value dial or the [DEC] [INC] buttons to select the
desired save destination.
6. Press the [ENTER] button.
A message will ask “Are you sure?”
7. To execute, choose “OK” and press the [ENTER] button.
MEMO
If you decide to cancel without saving, press the [EXIT] button.
NOTE
Never turn o the unit while settings are being saved.
Panning the Sound with Depth
(MOTIONAL SURROUND Screen)
In addition to the left/right panning of each sound, the INTEGRA-7
lets you specify its depth in the sound eld.
In the MOTIONAL SURROUND screen you can visually specify the
left/right panning and depth of each sound.
1. Press the [MOTIONAL SURROUND] button.
Motional Surround will turn on, and the MOTIONAL SURROUND
screen will appear.
2. Use the cursor buttons to specify the position (left/right
and depth) of each instrument.
You can use the PART [ ] [ ] buttons to switch the part you’re
editing.
MEMO
• If you want to turn Motional Surround o, press the [MOTIONAL
SURROUND] button once again in the Motional Surround
screen.
• If you want to return to the previous screen but leave Motional
Surround turned on, press the [EXIT] button.
• The [MOTIONAL SURROUND] button’s indicator shows whether
Motional Surround is on (lit) or o (unlit).
• By holding down the [SHIFT] button and pressing the
[MOTIONAL SURROUND] button, you can access the Motional
Surround screen without changing the Motional Surround on/
o setting.
* Motional Surround and reverb/chorus cannot be applied at the
same time.
* When you turn Motional Surround on, reverb/chorus will turn
o.
34