User Manual
Editing a Tone
Editing the Tones Assigned to a Part
Here’s how to edit the sound of each part.
1. Select the part that you want to edit.
2. Press the [EDIT] button.
The tone edit screen will dier depending on the type of tone that’s
selected for the part.
MEMO
For details on the tone parameters, refer to “Parameter Guide
PDF.”
SuperNATURAL Acoustic Tone (SN-A)
MFXINST
Tab Explanation
COMMON Settings that apply to the entire tone.
INST
Settings for the INST assigned to the tone.
These are detailed settings for the INST that’s
assigned.
MFX Settings for the multi-eect.
MFX CTRL Settings for controlling MFX via MIDI.
SuperNATURAL Synth Tone (SN-S)
PARTIAL 3
PARTIAL 2
AFTERTOUCH
MOD LFO
LFO
OSC FILTER
AMP
MODIFY
PARTIAL 1
MFX
Tab Explanation
COMMON Settings that apply to the entire tone.
OSC
Settings for the waveform that is the basis of the
tone.
PITCH Settings related to pitch.
FILTER Settings related to the lter.
AMP Settings related to the volume.
LFO Settings for the LFO that modulates the sound.
MOD LFO Settings for the modulation applied to the sound.
AFTERTOUCH Settings related to aftertouch.
MISC Settings for envelopes and portamento time control.
MFX Settings for the multi-eect.
MFX CTRL Settings for controlling MFX via MIDI.
38